Vacuum

  • Apiezon H

    $197.75
    25g Apiezon H Grease is a silicone-free high vacuum grease perfectly suited for use at high temperatures in both scientific and industrial applications. Thanks to its 'stiction' power Apiezon H Grease is ideal for use with laboratory glassware. Its high thermal conductivity makes it the perfect vacuum grease in situations where heat sink media requires adhesion. Exhibits a vapour pressure of 1.7 x 10-9 Torr at 20°C and upper operating temp of 240°C
    Why Use Apiezon H Grease?
    • performs well under a wide range of temperatures, from -10 to +240°C, and retains its optimum consistency at temperatures between +10 and +110°C
    • rather than melting, actually becomes stiffer as temperature increases and therefore is not recommended for highly stressed bearings
    • has excellent heat transfer properties
    • conducts heat away from the site of operation, reducing the danger of overheating and damaging heat-sensitive components
    • exhibits good 'stiction' or sticking power
    • has powerful 'gettering' action, meaning it absorbs potentially harmful grease and chemical impurities on metal and glass surfaces
    • is easy to clean and remove as it is soluble in hydrocarbon solvents
  • The Edwards Speedivalve (sp25k) is a diaphragm sealed in-line, isolation valve. The construction consists essentially of a flexible elastomeric dia­phragm which is sealed onto a lightly polished seat by a screw thread mechanism. The valve terminates in NW flanges and can be pipeline supported or panel mounted. Fits on all your KF25 flanges. Summit recommends these KF25 parts for this item:
    Easy to operate with visual indication of valve open (SP10K to SP25K). Leak tight to better than 10-6 mbar ls-1 / 8 x 10-7 Torr ls-1. Diaphragm completely isolates mechanism from vacuum system. Will withstand 9 bar overpressure (SP10K to SP40K, with Co-Seal)
     
  • Rodaviss SS Trap Adapter 45  fits directly on the bottom of your 45/50 cold trap. This billet stainless steel adapter secures seamlessly using a Rodaviss Kit (not included). SS 45F x 1/4 BSPP Threading. Billet stainless steel cold trap adapter.
  • The 29 SPD Discharge Adapter fits directly onto any glass 29/42 male or into a 29/42 KF25 adapter. Threads are 1/4 BSPP. Single adapter only. 100% Billet stainless steel and 100% USA made.
  • The Swagelok DV-2 is a ball and needle 3/8 dual pump valve kit.  A high vacuum, 2 piece valve setup, rated for up to 8/9 scale. This item itself is a major tool in controlling vacuum or bleeding atmosphere into pump without risking any leak point. Swagelok is leading the industry in these types of valves. See for yourself: swagelok/valves
  • The EMF20 Filter attaches to your Edwards pump. This filter captures oil mist from the outlet of pumps, which would otherwise be ejected into the atmosphere. Comes with clamp and O-ring. Call for pricing and availability. To purchase, please contact Summit Research at 831-226-2948 or by eMail.
  • $248.00

    I 19 Standard Vacuum Pump Fluid. 5 Gallons (18.927 Liters) Hydrocarbon fluid for mechanical vacuum pumps used in non-corrosive applications. This premium grade oil produces lower vapor pressures, reduced backstreaming, and has longer fluid life. sds To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
  • Invoil 32 is a premium diffusion pump oil with a specially developed double-distilled diffusion pump fluid. This hydrocarbon is modified for high temperature use with a strong antioxidant. Its properties include increased resistance to decomposition and improved stability against oxidation.
    Specifications
    Vapor Pressure at 25ºC (torr) 5x10-6
    Boiling Point at .01 torr  (ºC) 127
    Viscosity at 40ºC (cSt) 58
    Viscosity at 100ºC (cSt) 8.5
    Pour Point (ºC) -10
    Flash Point (ºC) 241
    Fire Point (ºC) 271
    Density at 25ºC (g/ml) 0.86
  • The Apollo Vacuum Controller is an advanced scientific laboratory vacuum controller, display, digital readout, and vacuum live reading analysis device. (Pictured here shows location of the display and first 536 sensor {above}. Second picture shows location of second 536 sensor off the vacuum pump line {below}) This controller not only shows real time data for your laboratory process, it can also be used as a live pump down curve testing device for vacuum pumps in your lab. From seeing guaranteed accurate readings in your short path system to identifying the health of your pump, the Apollo is the most advanced tool in your arsenal when it comes to vacuum control with accuracy and quality second to none. All Summit hardware is now compatible with the new free ATHENA software. Here is a Youtube to help install. Do you have a rotary evaporator or falling film that needs full vacuum control? Take a look at the Proportional Vacuum Controller.   Standard options:
    • The first two pre-installed board locations have two 536 cleanable sensors (KF25), factory calibrated to a NIST certified test bench on each device prior to shipping. Usually one sensor is attached to the laminar portion of a short path to tell you what is going on in the system, and the second is attached to the pump to tell you the health and performance of the pump array in use.
    • A third board location is pre-installed and pre-calibrated for the use of a UHVP sensor (ultra high vacuum pressure) which is an option to be added-on if the user wants to use a third pump bay accessory like a diffusion pump or turbo pump etc. without any further needed upgrades to the Apollo itself.
    • A fourth board location is pre-installed for phantom power. There are two phantom power ports used to control the optional added-on feature on external control valves.  Each are independently controlled by the Apollo core software built in. With no needed upgrades to the Apollo itself.
    • A fifth board location is pre-installed with sweep valve controlling hardware.
    This device comes with the control box (brain), the digital chemical duty touch screen, two 536 sensors and all necessary device cables and cords. (everything in last picture) Spec Sheet Button Upgrades are:
    • Inert gas sweep valve kit and pressure regulator for turbo charging system speeds in various processes.
    • Up to two phantom powered Edwards bellow valves for vacuum valve control of wet or dry vacuum operation.
    • UHVP Sensor for additional diffusion or turbo control.
    Custom configurations allow the Apollo to be configured directly from summit with up to four sensors, and four control valves, both proportional and on/off style. Please inquire if you want your Apollo Vacuum Controller you've purchased expanded and/or modified.
  • $8,275.00

    New ACP15 multi-stage pump

    • The New ACP15 multi-stage pump meets the requirements of applications where clean and dry vacuum is needed.
    • The frictionless pumping module is optimized to operate without internal lubricant and provides outstanding oil-free vacuum with no hydrocarbon vapor back streaming. Without any seals between rotor and stator no particles are generated.
    • The absence of wearing parts inside the pumping module allows for unsurpassed long-term stability and high reliability in even the most demanding applications.
    • The frequency converter driven motor provides constant rotational speed, thus stable pumping speed and consistent ultimate pressure are achieved all over the world.
    • Our ACP pumps require overhaul only every 22,000 hours of operation for the ACP 28/40 and 20,000 hours of operation for the ACP 15 resulting in low cost of ownership.
    • High flow gas ballast ports and drainable silencers allow the ACP to pump high amounts of condensable vapors (up to 1,000 g/h of pure water vapor).
    For entire detailed specifications, visit pfeiffer-vacuum.com for a PDF To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
  • $10,515.00

    New ACP28 multi-stage pump

    • The New ACP28 multi-stage pump meets the requirements of applications where clean and dry vacuum is needed.
    • The frictionless pumping module is optimized to operate without internal lubricant and provides outstanding oil-free vacuum with no hydrocarbon vapor back streaming. Without any seals between rotor and stator no particles are generated.
    • The absence of wearing parts inside the pumping module allows for unsurpassed long-term stability and high reliability in even the most demanding applications.
    • The frequency converter driven motor provides constant rotational speed, thus stable pumping speed and consistent ultimate pressure are achieved all over the world.
    • Our ACP pumps require overhaul only every 22,000 hours of operation for the ACP 28/40 and 20,000 hours of operation for the ACP 15 resulting in low cost of ownership.
    • High flow gas ballast ports and drainable silencers allow the ACP to pump high amounts of condensable vapors (up to 1,000 g/h of pure water vapor).
    For entire detailed specifications, visit pfeiffer-vacuum.com for a PDF
    To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
  • $12,525.00

    New ACP40 multi-stage pump

    • The New ACP40 multi-stage pump meets the requirements of applications where clean and dry vacuum is needed.
    • The frictionless pumping module is optimized to operate without internal lubricant and provides outstanding oil-free vacuum with no hydrocarbon vapor back streaming. Without any seals between rotor and stator no particles are generated.
    • The absence of wearing parts inside the pumping module allows for unsurpassed long-term stability and high reliability in even the most demanding applications.
    • The frequency converter driven motor provides constant rotational speed, thus stable pumping speed and consistent ultimate pressure are achieved all over the world.
    • Our ACP pumps require overhaul only every 22,000 hours of operation for the ACP 28/40 and 20,000 hours of operation for the ACP 15 resulting in low cost of ownership.
    • High flow gas ballast ports and drainable silencers allow the ACP to pump high amounts of condensable vapors (up to 1,000 g/h of pure water vapor).
    For entire detailed specifications, visit pfeiffer-vacuum.com for a PDF
    To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
  • $16,500.00

    These Vacuubrand VARIO® pumping units feature a very high pumping speed even close to the outstanding ultimate vacuum and are ideal for high vacuum requirements with most high boiling solvents. They provide precise vacuum control by continuously adjusting the pump´s motor speed. The controller provides fully automatic evaporations without any need for parameter input. The pump design offers exceptionally high chemical resistance supporting almost universal usage in chemistry and pharmaceutics. The NT VARIO pumping unit relies on a well-proven operating concept for evaporations with large amounts of solvents. The inlet separator (AK) retains particles and liquid droplets, the waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling, and active protection of the environment. The NT VARIO can be equipped with these accessories later. The Vario 12c pump is an excellent solution for those who need high pumping speed and are working with high boiling point solvents. Combined with the reliability born of its chemical resistant fluoropolymer and perfluoroelastomer wetted materials, this pump delivers reliable performance for floor-standing rotary evaporators, vacuum drying ovens, vacuum distillation columns, and other similar applications. The integrated vacuum controller provides an easy-to-use, application based interface that covers all common lab applications. The vacuum controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the vacuum controller continuously detects the boiling point and automatically adjusts the vacuum process to maintain process control. With VARIO control, the pump runs only as fast is necessary. This extends the maintenance intervals and makes the pumping unit whisper quiet. Also available 4c Vario

    Performance features

    • Automatic adjustment of the vacuum level throughout the process for high process reproducibility and unattended operation
    • Short process times due to zero-fluctuation (hysteresis-free) vacuum control, even for large amounts of vapor
    • Removable CVC 3000 vacuum controller, can be arranged flexibly, easily operated with clear text menus
    • Extraordinary diaphragm life for minimum operational and servicing costs
    • PC 3012 NT VARIO: excellent environmental friendliness due to efficient solvent recovery, inlet separator for demanding applications
    To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
  • Sale!

    Vacuubrand 4C Vario

    Original price was: $10,500.00.Current price is: $3,999.99.
    The Vacuubrand 4C Vario Diaphragm Pump is an excellent solution for labs working with most high boiling point solvents. This pump's three stage configuration gives it an ultimate vacuum rating of 1.5 mbar. The integrated vacuum controller (CVC-3000 included) provides an easy-to-use, application based interface that covers all common lab applications. The vacuum controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the vacuum controller continuously detects the boiling point and automatically adjusts the vacuum process as necessary. VARIO's on-demand motor speed control results in whisper-quiet operation and unparalleled length of service intervals for wear parts. Also available 12C Vario
  • KF25 stainless steel 90 degree elbow for high vacuum applications. Don't forget your clamps! Summit has other KF25 products in our Stainless Steel section.
  • Micro-controllable inert gas valve that installs directly to your boiling flask. Sweep valve connects to your calibrated sweep gas regulator. These components give you even more control with the Apollo Vacuum Controller. Complete control at your fingertips! Included:
    • KF16 (PTFE non-expanding material) to 24/40 fitting
    • KF16 O-ring
    • KF16 Clamp
    • Extended tube sensor with threading
    • Wiring
  • This is a high precision inert gas regulation valve assembled at Micro Matic & calibrated at DigiVac.
    • Forged brass and die cast for durability
    • O-Ring inlet seal at tank connection
    • Set screw pressure adjustment
    • Flow control inlet
    • Calibrated exclusively to the Summit sweep valve & vacuum controller
  • 100g Long term lubrication for high temperature applications under the influence of aggressive media up to 250C. Klübertemp GR RT greases are white, homogeneous long-term greases based on perfluorinated polyether oils (PFPE) and polytetrafluoroethylene (PTFE). This series contains greases with a range of specific additives for use in different applications. Klübertemp GR RT 15 shows good compatibility with plastics and elastomers, enabling a wide range of component materials to be selected. Vapor pressure of 2.0 x 10⁸ Torr at 20°C Vapor pressure of 4.7 x 10⁶ Torr at 100°C   
  • $4,685.00

    Atlas Copco GVD28 1 Phase, 110-120/200-230V, 50/60Hz. Pump oil and EMF20 with accessories not included.
    • Type of product: Vane Pump
    • Condition: New
    • Inlet: KF25
    • Exhaust: Hose Nipple
    • Motor: 1 Phase, 110-120/200-230V, 50/60Hz
    • Oil: Hydrocarbon
    • Pumping speed: 23.3 CFM (60 Hz)
    • Ultimate vacuum: 7.7 x 10-4 Torr (without gas ballast)
    • Weight: 97 lbs
    To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
  • $6,831.25

    Edwards E2M28, 1 Phase, 115-240V, 50/60Hz vacuum pump. Pump oil and EMF20 with accessories not included.
    • Type of product: Vane Pump
    • Condition: New
    • Inlet: KF25
    • Exhaust: KF25
    • Motor: 1 Phase, 115-240V, 50/60Hz
    • Oil: Hydrocarbon
    • Pumping speed: 19.5 CFM (60Hz)
    • Ultimate pressure: 7.5 x 10-4 Torr (without gas ballast)
    • Weight: 97 lbs
    To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
  • $7,275.00

    Edwards E2M28, 1 Phase, 115-240V, 50/60Hz vacuum pump. Pump oil and EMF20 with accessories are included.
    • Type of product: Vane Pump
    • Condition: New
    • Inlet: KF25
    • Exhaust: KF25
    • Motor: 1 Phase, 115-240V, 50/60Hz
    • Oil: Hydrocarbon
    • Pumping speed: 19.5 CFM (60Hz)
    • Ultimate pressure: 7.5 x 10-4 Torr (without gas ballast)
    • Weight: 97 lbs
    To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
  • $6,793.75

    Atlas Copco GVD28 1 Phase, 110-120/200-230V, 50/60Hz. Pump oil and EMF20 with accessories are included.
    • Type of product: Vane Pump
    • Condition: New
    • Inlet: KF25
    • Exhaust: Hose Nipple
    • Motor: 1 Phase, 110-120/200-230V, 50/60Hz
    • Oil: Hydrocarbon
    • Pumping speed: 23.3 CFM (60 Hz)
    • Ultimate vacuum: 7.7 x 10-4 Torr (without gas ballast)
    • Weight: 97 lbs
    To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
  • $2,977.00

    Specifications
    • Manufacturer: Agilent
    • Condition: New
    • Part Number: IDP3B01
    • Inlet: KF16
    • Exhaust: 1/4" FNPT
    • Motor: 1 Phase, 115V, 60Hz
    • Pumping speed: 1.76 CFM (50Hz), 2.11 CFM (60Hz)
    • Ultimate pressure: 2.5 x 10-1 Torr
    • Weight: 21 lbs
    Features and Benefits
    • Low noise and vibration.
    • Oil-free and contamination-free.
    • High pumping speed provides rapid pump down and high gas throughput.
    • Very low base pressure ensures optimal turbo pump performance with increased system reliability.
    • IDP Pumps fully isolate the bearings and motor from the vacuum space and contain all pumped gases.
    • Scroll pump technology’s long service interval results in low cost of ownership.
    • Easy to integrate: minimal burden on system utilities& suitable for use inside cabinet enclosures.
    • At only 21 pounds (9.5 kg), IDP Pumps are lighter than mechanical rotary vane and membrane pumps of similar pumping speed.
    Shipping not included To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
  • $5,164.00

    Specifications
    • Manufacturer: Agilent
    • Condition: New
    • Part Number: IDP3B01
    • Inlet: KF25
    • Exhaust: KF16
    • Motor: 1 Phase, 100-120/200-240V, 50/60Hz
    • Pumping speed: 4.23 CFM (50Hz), 5.35 CFM (60Hz)
    • Ultimate pressure: 3 x 10-2 Torr (50Hz), 2 x 10-2 Torr (60Hz)
    • Weight: 54 lbs
    Features and Benefits
    • Low noise and vibration.
    • Oil-free and contamination-free.
    • High pumping speed provides rapid pump down and high gas throughput.
    • Very low base pressure ensures optimal turbo pump performance with increased system reliability.
    • IDP Pumps fully isolate the bearings and motor from the vacuum space and contain all pumped gases.
    • Scroll pump technology’s long service interval results in low cost of ownership.
    • Easy to integrate: minimal burden on system utilities& suitable for use inside cabinet enclosures.
    • IDP Pumps are lighter than mechanical rotary vane and membrane pumps of similar pumping speed.
    Shipping not included To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
  • $5,490.00

    Specifications
    • Manufacturer: Agilent
    • Condition: New
    • Part Number: IDP3B01
    • Inlet: KF25
    • Exhaust: KF16
    • Motor: 1 Phase, 100-120/200-240V, 50/60Hz
    Features and Benefits
    • Low noise and vibration.
    • Oil-free and contamination-free.
    • High pumping speed provides rapid pump down and high gas throughput.
    • Very low base pressure ensures optimal turbo pump performance with increased system reliability.
    • IDP Pumps fully isolate the bearings and motor from the vacuum space and contain all pumped gases.
    • Scroll pump technology’s long service interval results in low cost of ownership.
    • Easy to integrate: minimal burden on system utilities& suitable for use inside cabinet enclosures.
    • IDP Pumps are lighter than mechanical rotary vane and membrane pumps of similar pumping speed.
    Shipping not included To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
  • $7,117.00

    Specifications
    • Manufacturer: Agilent
    • Condition: New
    • Part Number: IDP3B01
    • Inlet: KF25
    • Exhaust: KF16
    • Motor: 1 Phase, 100-115/220-230V, 50/60Hz
    • Pumping speed: 7.53 CFM (50Hz), 9.06 CFM (60Hz)
    • Ultimate pressure: 1 x 10-2 Torr
    • Weight: 75 lbs
    Features and Benefits
    • Low noise and vibration.
    • Oil-free and contamination-free.
    • High pumping speed provides rapid pump down and high gas throughput.
    • Very low base pressure ensures optimal turbo pump performance with increased system reliability.
    • IDP Pumps fully isolate the bearings and motor from the vacuum space and contain all pumped gases.
    • Scroll pump technology’s long service interval results in low cost of ownership.
    • Easy to integrate: minimal burden on system utilities& suitable for use inside cabinet enclosures.
    • IDP Pumps are lighter than mechanical rotary vane and membrane pumps of similar pumping speed.
    Shipping not included To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
  • $14,095.00

    Specifications
    • Type of Product: Scroll Pump
    • Manufacturer: Edwards
    • Condition: New
    • Part Number: A73001983
    • Inlet: KF40
    • Exhaust: KF25
    • Motor: 1 Phase, 100-120/200-230V, 50/60Hz
    • Pumping speed: 21 CFM
    • Ultimate vacuum: 8 x 10-3 Torr
    • Weight: 105 lbs
    Features and Benefits
    • closed loop temperature monitoring
    • dry, clean vacuum free of lubricants
    • simple, single-sided scroll design
    • patented isolated bearing shield
    • world-wide voltage compatibility
    • low power consumption
    • controllable gas ballast
    • inverter driven motor
    Shipping not included To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
  • The Apollo Proportional Vacuum Controller is an advanced scientific laboratory vacuum controller, display, digital readout, and vacuum live reading analysis device. This version of the Apollo can service up to FOUR REMOTE vacuum sensors of any kind with up to FOUR REMOTE vacuum valves that are controlled by the Digi-Vac dinamo proportional live CFM control valve. KF25 flanges, barbed breather valve. This device is essential for high speed rotary evaporation control and crucial for controlling and even increasing recovery rates on falling film evaporation machines. Those might be the top two, but the possibilities are rising with new tech that have KF25 fitment. The device has a continuous CFM open-close valve that never actually stops moving. Typically it will not close but the effect is reached with the ability to increase or decrease CFM size allowing to maintain vacuum select point control. If the set point comes up, it will close the valve. If the set point goes down it will open the valve. Typically very minute movements inside make a huge performance difference and increase in vacuum pump performance allowing continual cfm-to-micron control. This Apollo controller can be expanded but comes with ONE EXTERNAL COUPLED device standard. This is an Apollo brain unit with a chemical duty touch screen, with remote valve/sensor. Standard options are as follows:
    • The first board location is equipped by summit with one sensor designed for aggressive solvent use and one proportional valve (dinamo valve).
    Further up-gradable options are as follows:
    • Three more slots are available to accept up to three more sensors and three more valves.
    • The additional optional upgrade is only several hundred dollars for each additional proportional valve control added-on.  any length cable can be used, please inform us for a specialty need with longer cables than what is supplied.
    This unit is not the same as Apollo Vacuum Controller  
  • The Discharge Pump allows you to remove fluid from your system without breaking vacuum. This would replace the need for receiving flasks. Controller box allows you to regulate heat and speed at the touch of a finger. You will need to elevate/modify your current short path system to utilize this pump. Instagram Demo instagram logo Included:
    • Discharge Pump
    • Pump Controller
    Unit comes with your choice of #29 250ml glass Squib Flask and stainless #29 1/4 BSPP adapter OR stainless #45 1/4 BSPP adapter for a cold trap. (BSPP's last picture for reference) Collection vessel not included
  • Adapter fits any KF25 flange with KF25 o-ring and KF25 clamp. Threads are 0.25 inch BSPP. Commonly used for wipers (wiped film or rolling film) using Summit Discharge Pumps. Single adapter only. 100% Billet stainless steel and 100% USA made.