-
The Swagelok DV-2 is a ball and needle 3/8 dual pump valve kit. A high vacuum, 2 piece valve setup, rated for up to 8/9 scale. This item itself is a major tool in controlling vacuum or bleeding atmosphere into pump without risking any leak point. Swagelok is leading the industry in these types of valves. See for yourself: swagelok/valves
-
KF16x25 Reducer. Stainless steel adapter that reduces the size of your vacuum pipe diameter. Summit has other KF25 products in our Stainless Steel section.
-
Rodaviss SS Trap Adapter 45 fits directly on the bottom of your 45/50 cold trap. This billet stainless steel adapter secures seamlessly using a Rodaviss Kit (not included). SS 45F x 1/4 BSPP Threading. Billet stainless steel cold trap adapter.
-
The 29 SPD Discharge Adapter fits directly onto any glass 29/42 male or into a 29/42 KF25 adapter. Threads are 1/4 BSPP. Single adapter only. 100% Billet stainless steel and 100% USA made.
-
The Apollo Vacuum Controller is an advanced scientific laboratory vacuum controller, display, digital readout, and vacuum live reading analysis device.
(Pictured here shows location of the display and first 536 sensor {above}. Second picture shows location of second 536 sensor off the vacuum pump line {below})
This controller not only shows real time data for your laboratory process, it can also be used as a live pump down curve testing device for vacuum pumps in your lab. From seeing guaranteed accurate readings in your short path system to identifying the health of your pump, the Apollo is the most advanced tool in your arsenal when it comes to vacuum control with accuracy and quality second to none. All Summit hardware is now compatible with the new free ATHENA software. Here is a Youtube to help install. Do you have a rotary evaporator or falling film that needs full vacuum control? Take a look at the Proportional Vacuum Controller. Standard options:
- The first two pre-installed board locations have two 536 cleanable sensors (KF25), factory calibrated to a NIST certified test bench on each device prior to shipping. Usually one sensor is attached to the laminar portion of a short path to tell you what is going on in the system, and the second is attached to the pump to tell you the health and performance of the pump array in use.
- A third board location is pre-installed and pre-calibrated for the use of a UHVP sensor (ultra high vacuum pressure) which is an option to be added-on if the user wants to use a third pump bay accessory like a diffusion pump or turbo pump etc. without any further needed upgrades to the Apollo itself.
- A fourth board location is pre-installed for phantom power. There are two phantom power ports used to control the optional added-on feature on external control valves. Each are independently controlled by the Apollo core software built in. With no needed upgrades to the Apollo itself.
- A fifth board location is pre-installed with sweep valve controlling hardware.
Upgrades are:
- Inert gas sweep valve kit and pressure regulator for turbo charging system speeds in various processes.
- Up to two phantom powered Edwards bellow valves for vacuum valve control of wet or dry vacuum operation.
- UHVP Sensor for additional diffusion or turbo control.
-
Micro-controllable inert gas valve that installs directly to your boiling flask. Sweep valve connects to your calibrated sweep gas regulator. These components give you even more control with the Apollo Vacuum Controller. Complete control at your fingertips! Included:
- KF16 (PTFE non-expanding material) to 24/40 fitting
- KF16 O-ring
- KF16 Clamp
- Extended tube sensor with threading
- Wiring
-
The Discharge Pump allows you to remove fluid from your system without breaking vacuum. This would replace the need for receiving flasks. Controller box allows you to regulate heat and speed at the touch of a finger. You will need to elevate/modify your current short path system to utilize this pump. Instagram Demo
Included:
- Discharge Pump
- Pump Controller
-
Adapter fits any KF25 flange with KF25 o-ring and KF25 clamp. Threads are 0.25 inch BSPP. Commonly used for wipers (wiped film or rolling film) using Summit Discharge Pumps. Single adapter only. 100% Billet stainless steel and 100% USA made.
-
This is a high precision inert gas regulation valve assembled at Micro Matic & calibrated at DigiVac.
- Forged brass and die cast for durability
- O-Ring inlet seal at tank connection
- Set screw pressure adjustment
- Flow control inlet
- Calibrated exclusively to the Summit sweep valve & vacuum controller
-
KF25 Straight Pipe is an 8 inch stainless steel high vacuum pipe. KF25 Flanges. Summit has other KF25 products in our Stainless Steel section. Looking for a specific length?.. we might be able to help! Call us
-
The KF16 Clamp combined with KF16 O Ring form a vacuum tight seal between the connection flanges. This circumferential clamp is used for connecting standard NW16 / KF16 vacuum components. Aluminum clamp with butterfly nut for easy tightening.
-
Invoil 32 is a premium diffusion pump oil with a specially developed double-distilled diffusion pump fluid. This hydrocarbon is modified for high temperature use with a strong antioxidant. Its properties include increased resistance to decomposition and improved stability against oxidation.
Specifications Vapor Pressure at 25ºC (torr) 5x10-6 Boiling Point at .01 torr (ºC) 127 Viscosity at 40ºC (cSt) 58 Viscosity at 100ºC (cSt) 8.5 Pour Point (ºC) -10 Flash Point (ºC) 241 Fire Point (ºC) 271 Density at 25ºC (g/ml) 0.86 -
KF16x10 Centering Ring. Viton rubber and stainless steel. Used with breather valves and barbs. Comes in the KF Breather Valve Kit. 100% USA made.
-
KF16 O Ring will fit between any KF16 flange while using a KF16 clamp. Made from Viton and stainless steel.
-
Billet stainless steel adapter that reduces the diameter of your KF vacuum pipe. KF40 to KF25 flange. Summit has corresponding KF25 and KF40 products in our Stainless Steel section.
-
The KF40 Clamp combined with KF40 O Ring form a vacuum tight seal between the connection flanges. This circumferential clamp is used for connecting standard NW40 / KF40 vacuum components. Aluminum clamp with butterfly nut for easy tightening.
-
AV 10k airvalve KF breather valve. 100% USA made. In conjunction with: Or get them all together in the Breather Valve Kit
-
KF25 stainless steel 90 degree elbow for high vacuum applications. Don't forget your clamps! Summit has other KF25 products in our Stainless Steel section.
-
Sale!The KF25 cross is a staple in most larger vacuum systems that require that extra flange for vacuum gages or other high vacuum devices. Built to last with 304 stainless steel and superior TIG welding. All KF flanges connect with o-ring and clamp (links below). Cross is 4 inch end to end.
-
The SVC-1 Summit Vacuum Control is used for chemical duty solvent recovery or vacuum control. Either for rotary evaporators, filtration or recovering highly volatile solvents. This unit was designed and produced on the market to establish a new standard, with new circuit boards, PTFE valves and the LEAST amount of parts compared to any competitor units - the SVC-1 makes a new standard in high flow vacuum regulation and control. The vacuum regulator is particularly useful when you are looking to maintain pressure at a certain level as needed for botanical processing and rotary evaporation. Mounting can be bench-top or on a laboratory pole.
- Display of both the set-point and current vacuum control
- Fine control of target vapor pressure for more precise compound separation through distillation
- Flow path designed to be tolerant of harsh chemicals
- CE and RoHS Certified
- Fine Grained Vacuum Control
- Simultaneous display of both current vacuum and set point
- Direct, easy set point setting
- Remote control via USB
- Keeps your pump oil away from your process
- Enables using reliable and long lasting rotary vane oil pumps in applications where diaphragm pumps were previously required
- Keeps vacuum pumps near their base pressure resulting in longevity, fewer oil changes and less oil mist
Design Features
- Simple to use Interface
- Flow path designed to be tolerant of harsh chemicals
- Use of larger orifice parts results in much faster pump-downs
-
The KF25 Bellow is a corrugated stainless steel pipe that connects to corresponding kf25 flanges. These malleable pipes allow for some error as apposed to hooking up a solid straight pipe. Available in 10, 20 and 40 inch lengths. Don't forget other KF25 fittings and accessories: 100% stainless steel. 100% USA made. Bellow warning: Stretch and bend your bellow into position before installation. Engaging your pump(s) while not doing so could make the bellow jolt/jostle, putting stress on or damage glassware, voiding limited warranties. KF25 Bellow