The HB Series Halo heads are inspired by our original fraction collector technology and have taken theses concepts to a new level. Halo technology allows for liquid temperature modulation at the top the head, dialing in your temps at a point in your short path distillation never before achieved.
See the Halo in action: Instagram Demo
100mm clamp, O-ring and PTFE GL18s (4) included. Has 34/45 discharge port with built in key. Our 100mm heads fit exclusively to Summit flanged boiling flasks:
As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process.
Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Short Path Distillation Head HB1 Halo 100
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
The HB Series Halo heads are inspired by our original fraction collector technology and have taken theses concepts to a new level. Halo technology allows for liquid temperature modulation at the top the head, dialing in your temps at a point in your short path distillation never before achieved.
See the Halo in action: Instagram Demo
34/45 key, 100mm clamp with O-ring and PTFE GL18s (4) included. 34/45 discharge port. Our 100mm heads fit exclusively to Summit flanged boiling flasks:
As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process.
Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Short Path Distillation Head HB2 Halo 100
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
Rebuilt Edwards E2M40 + Blower (mechanical booster)
All air cooled dual stage Rotary Vane Pump, 208 V, 50 Hz/208-230 V, 60 Hz/460 V, 60 Hz, Three Phase with KF-40 inlet to blower.
Edwards E2M series two stage oil sealed rotary vane vacuum pumps are renowned for their high ultimate vacuum, rapid pumping speeds, quiet operation and ability to handle water vapor. These direct drive rotary vane pumps are inherently compact and vibration free.
Blowers add a dimension of vacuum that tops most dual pump options.
Mechanical boosters feature the unique hydro-kinetic drive that provides pump down times cut by 50%, when compared with direct drive pumps, no bypass lines or pressure switches required, universal voltage motors, reduced capital and operating costs, air cooled motors – with water cooled options, and quiet, minimum vibration. Operating at relatively low pressures, the mechanical booster pump is not exposed to the same concentrations of corrosive process media as is the backing pump, which makes it highly reliable.
Comes with Pump, Blower, MF100 filter and I 19 Standard fluid.
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
A BINDER safety vacuum drying oven ensures maximum safety when drying organic solvents standard with TÜV/GS. The inner chamber of the VDL safety vacuum drying oven is designed according to ATEX guidelines 2014/34/EU Ex II 3/-G Ex h IIB T1-T3 Gc X.
Benefits
Fast and gentle drying
Direct heat transfer through large thermal conducting plates
Safe work with one-of-a-kind safety concept
Coordinated, modular system with vacuum pump and vacuum module
2 year warranty
Important characteristics
Temperature range: room temperature plus 15 °C to 200 °C
ATEX compliance chamber's interior: Ex II 3/-G Ex h IIB T1-T3 Gc X
APT.line™ preheating chamber technology
Controller with time-segment and real-time programming
2 aluminum expansion racks
Inert gas connection
Shatterproof, spring-mounted safety glass panel
Pressurized instrument panel with compressed air connection
Pressure control device for heating activated < 125 mbar
Flame protection gasket
Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
Computer interface: RS 422
Performance Data Temperature
Heating-up time to 100 °C [min]
65
Temperature fluctuation [± K]
0.1
Temperature range 15 °C above ambient temperature to [°C]
200
Temperature variation at 100 °C [± K]
1.5
Vacuum Data
Leak rate [bar/h]
0.01
Permitted end vacuum [mbar]
0.01
Electrical data
Nominal power [kW]
0.8
Phase (Nominal voltage)
1~
Power frequency [Hz]
50/60
Rated Voltage [V]
230
Unit fuse [A]
10
Connections
Compressed air connection for pressure-encapsulation
8 mm
Inert gas connection with flow limiter (RP")
3/8
Measuring access port with small flange [DN mm]
16
Vacuum connection with small flange [DN mm]
16
Housing dimensions not incl. fittings and connections
Depth net [in]
19.7
Height net [in]
25.81
Width net [in]
20.29
Internal Dimensions
Depth [in]
11.62
Height [in]
11.23
Width [in]
11.23
Measures
Interior volume [cu.ft.]
0.8
Load per rack [lbs]
44
Net weight of the unit (empty) [lbs]
139
Permitted load [lbs]
77
Viewing window height [in]
8.16
Viewing window width [in]
9.85
Wall clearance back [in]
3.94
Wall clearance sidewise [in]
5.32
Fixtures
Number of shelves (std./max.)
2/4
All technical data is specified for unloaded units with standard equipment at an ambient temperature of +22 °C ±3 °C and a power supply voltage fluctuation of ±10%. The temperature data is determined in accordance to BINDER factory standard following DIN 12880, observing the recommended wall clearances of 10 % of the height, width, and depth of the inner chamber. All indications are average values, typical for units produced in series. We reserve the right to change technical specifications at any time.
Further information (Data Sheets, Operating Manuals and Technical Drawings) can be downloaded from BINDER. A Basic vacuum oven diagram can be seen/downloaded here:
Shipping not included with this new item
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
A BINDER safety vacuum drying oven ensures maximum safety when drying organic solvents standard with TÜV/GS. The inner chamber of the VDL safety vacuum drying oven is designed according to ATEX guidelines 2014/34/EU Ex II 3/-G Ex h IIB T1-T3 Gc X.
Benefits
Fast and gentle drying
Direct heat transfer through large thermal conducting plates
Safe work with one-of-a-kind safety concept
Coordinated, modular system with vacuum pump and vacuum module
2 year warranty
Important characteristics
Temperature range: room temperature plus 15 °C to 200 °C
ATEX compliance chamber's interior: Ex II 3/-G Ex h IIB T1-T3 Gc X
APT.line™ preheating chamber technology
Controller with time-segment and real-time programming
2 aluminum expansion racks
Inert gas connection
Shatterproof, spring-mounted safety glass panel
Pressurized instrument panel with compressed air connection
Pressure control device for heating activated < 125 mbar
Flame protection gasket
Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
Computer interface: RS 422
Performance Data Temperature
Heating-up time to 100 °C [min]
80
Temperature fluctuation [± K]
0.1
Temperature range 15 °C above ambient temperature to [°C]
200
Temperature variation at 100 °C [± K]
2
Vacuum Data
Leak rate [bar/h]
0.01
Permitted end vacuum [mbar]
0.01
Electrical data
Nominal power [kW]
1.2
Phase (Nominal voltage)
1~
Power frequency [Hz]
50/60
Rated Voltage [V]
230
Unit fuse [A]
10
Connections
Compressed air connection for pressure-encapsulation
8 mm
Inert gas connection with flow limiter (RP")
3/8
Measuring access port with small flange [DN mm]
16
Vacuum connection with small flange [DN mm]
16
Housing dimensions not incl. fittings and connections
Depth net [in]
21.67
Height net [in]
30.53
Width net [in]
25.02
Internal Dimensions
Depth [in]
13.4
Height [in]
15.76
Width [in]
15.76
Measures
Interior volume [cu.ft.]
1.9
Load per rack [lbs]
44
Net weight of the unit (empty) [lbs]
209
Permitted load [lbs]
99
Viewing window height [in]
12.1
Viewing window width [in]
13.79
Wall clearance back [in]
3.94
Wall clearance sidewise [in]
5.32
Fixtures
Number of shelves (std./max.)
2/5
All technical data is specified for unloaded units with standard equipment at an ambient temperature of +22 °C ±3 °C and a power supply voltage fluctuation of ±10%. The temperature data is determined in accordance to BINDER factory standard following DIN 12880, observing the recommended wall clearances of 10 % of the height, width, and depth of the inner chamber. All indications are average values, typical for units produced in series. We reserve the right to change technical specifications at any time.
Further information (Data Sheets, Operating Manuals and Technical Drawings) can be downloaded from BINDER. A Basic vacuum oven diagram can be seen/downloaded here:
Shipping not included with this new item
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
A BINDER safety vacuum drying oven ensures maximum safety when drying organic solvents standard with TÜV/GS. The inner chamber of the VDL safety vacuum drying oven is designed according to ATEX guidelines 2014/34/EU Ex II 3/-G Ex h IIB T1-T3 Gc X.
Benefits
Fast and gentle drying
Direct heat transfer through large thermal conducting plates
Safe work with one-of-a-kind safety concept
Coordinated, modular system with vacuum pump and vacuum module
2 year warranty
Important characteristics
Temperature range: room temperature plus 15 °C to 200 °C
ATEX compliance chamber's interior: Ex II 3/-G Ex h IIB T1-T3 Gc X
APT.line™ preheating chamber technology
Controller with time-segment and real-time programming
2 aluminum expansion racks
Inert gas connection
Shatterproof, spring-mounted safety glass panel
Pressurized instrument panel with compressed air connection
Pressure control device for heating activated < 125 mbar
Flame protection gasket
Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
Computer interface: RS 422
Performance Data Temperature
Heating-up time to 100 °C [min]
95
Temperature fluctuation [± K]
0.1
Temperature range 15 °C above ambient temperature to [°C]
200
Temperature variation at 100 °C [± K]
3.5
Vacuum Data
Leak rate [bar/h]
0.01
Permitted end vacuum [mbar]
0.01
Electrical data
Nominal power [kW]
1.9
Phase (Nominal voltage)
1~
Power frequency [Hz]
50/60
Rated Voltage [V]
230
Unit fuse [A]
10
Connections
Compressed air connection for pressure-encapsulation
8 mm
Inert gas connection with flow limiter (RP")
3/8
Measuring access port with small flange [DN mm]
16
Vacuum connection with small flange [DN mm]
16
Housing dimensions not incl. fittings and connections
Depth net [in]
26.4
Height net [in]
35.46
Width net [in]
29.16
Internal Dimensions
Depth [in]
18.12
Height [in]
19.94
Width [in]
19.94
Measures
Interior volume [cu.ft.]
4.1
Load per rack [lbs]
44
Net weight of the unit (empty) [lbs]
337
Permitted load [lbs]
143
Viewing window height [in]
16.27
Viewing window width [in]
17.97
Wall clearance back [in]
3.94
Wall clearance sidewise [in]
5.32
Fixtures
Number of shelves (std./max.)
2/6
All technical data is specified for unloaded units with standard equipment at an ambient temperature of +22 °C ±3 °C and a power supply voltage fluctuation of ±10%. The temperature data is determined in accordance to BINDER factory standard following DIN 12880, observing the recommended wall clearances of 10 % of the height, width, and depth of the inner chamber. All indications are average values, typical for units produced in series. We reserve the right to change technical specifications at any time.
Further information (Data Sheets, Operating Manuals and Technical Drawings) can be downloaded from BINDER. A Basic vacuum oven diagram can be seen/downloaded here:
Shipping not included with this new item
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
Polyscience 3HP Heavy Duty Durachill will handle numerous tasks. Air cooled with simple operation and maintenance. When precision liquid cooling matters, go with Polyscience cooling solutions.
DuraChill® Chillers 2HP and up are not available outside of the United States
High capacity cooling for plasma torch cutting, machine tool hydraulics, high powered lasers, and other high heat generating processes and equipment
Displays temperature and pressure or flow rate simultaneously
User-adjustable temperature, pressure, and flow rate alarms
Simple operation and maintenance
Wide variety of options available
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
Polyscience 8HP Heavy Duty Air Cooled 3 Phase Chiller will handle different tasks - 50L roto rating. When precision liquid cooling matters, go with Polyscience cooling solutions.
DuraChill® Chillers 2HP and up are not available outside of the United States
High capacity cooling for plasma torch cutting, machine tool hydraulics, high powered lasers, and other high heat generating processes and equipment
Displays temperature and pressure or flow rate simultaneously
User-adjustable temperature, pressure, and flow rate alarms
Simple operation and maintenance
Wide variety of options available
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
Shipping not includedTo purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
High pumping speed provides rapid pump down and high gas throughput.
Very low base pressure ensures optimal turbo pump performance with increased system reliability.
IDP Pumps fully isolate the bearings and motor from the vacuum space and contain all pumped gases.
Scroll pump technology’s long service interval results in low cost of ownership.
Easy to integrate: minimal burden on system utilities& suitable for use inside cabinet enclosures.
IDP Pumps are lighter than mechanical rotary vane and membrane pumps of similar pumping speed.
Shipping not includedTo purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
High pumping speed provides rapid pump down and high gas throughput.
Very low base pressure ensures optimal turbo pump performance with increased system reliability.
IDP Pumps fully isolate the bearings and motor from the vacuum space and contain all pumped gases.
Scroll pump technology’s long service interval results in low cost of ownership.
Easy to integrate: minimal burden on system utilities& suitable for use inside cabinet enclosures.
IDP Pumps are lighter than mechanical rotary vane and membrane pumps of similar pumping speed.
Shipping not includedTo purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
Ultimate pressure: 3 x 10-2 Torr (50Hz), 2 x 10-2 Torr (60Hz)
Weight: 54 lbs
Features and Benefits
Low noise and vibration.
Oil-free and contamination-free.
High pumping speed provides rapid pump down and high gas throughput.
Very low base pressure ensures optimal turbo pump performance with increased system reliability.
IDP Pumps fully isolate the bearings and motor from the vacuum space and contain all pumped gases.
Scroll pump technology’s long service interval results in low cost of ownership.
Easy to integrate: minimal burden on system utilities& suitable for use inside cabinet enclosures.
IDP Pumps are lighter than mechanical rotary vane and membrane pumps of similar pumping speed.
Shipping not includedTo purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
High pumping speed provides rapid pump down and high gas throughput.
Very low base pressure ensures optimal turbo pump performance with increased system reliability.
IDP Pumps fully isolate the bearings and motor from the vacuum space and contain all pumped gases.
Scroll pump technology’s long service interval results in low cost of ownership.
Easy to integrate: minimal burden on system utilities& suitable for use inside cabinet enclosures.
At only 21 pounds (9.5 kg), IDP Pumps are lighter than mechanical rotary vane and membrane pumps of similar pumping speed.
Shipping not includedTo purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
Second to none in temperature uniformity, temperature stability and drying speed (purging). The combination of these high marks results in throughput (yield & productivity). This unit reaches 100°F in just 15 minutes thanks to the individual direct shelf heating. Each shelf has its own temperature controller for varying temperatures. KF25 full bore into the oven all the way to the chamber. No size reductions like in other ovens. These ovens are the real deal. CE & UL CERTIFIED!
9cu ft Vacuum oven specifications
Electric
110V 50/60Hz 1PH 13.6A, 1500W
Chamber
Size: 15.75 x 15 x 23" deep
Material: Stainless Steel
Capacity: 9 cubic feet
Temperature control
Controller: microcomputer with LCD display
Range: ambient to 302°F
Display units: Fahrenheit or Celsius
Accuracy: +/- 0.1°F
Uniformity: +/- 0.5 at 100°F5 Controllers (individual direct shelf heating)Warm-up time to 100°F: 15 minutes (without load)
Vacuum
Range: 0 to 76 cmHg (0 to 0.1MPa)
Vacuum port: KF25 flange x1, KF25 strait pipe with elbow x1, KF25 clamps and o-rings x2 (ALL INCLUDED)Vent port: 3/8" female threaded
Weight
Unit: 555 Lbs, shipping: 747 Lbs
Dimensions (WxDxH)
Unit: 38 x 37 x 32"
Shipping: 45 x 45 x 44"
Shelves
5 fixed and individually heated shelves, 23x27" each
Distance between shelves: 4"Area: 23x27" , 345 sq inches
Door gasket material
Food grade silicone
Observation window
3/4" tempered glass
Safety
Built in circuit breaker, over-temp protector
In-door lights
LED
CE & UL compliance
Yes
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
- 7 Du-aluminium Shelves (Superb heat conductivity)
- Excellent temperature uniformity and accuracy
- Stainless Steel Internal Chamber with shelves
- Safety assurance with C.E and U.L. conformity
KF25 full bore into the oven all the way to the chamber. No size reductions like in other ovens. These ovens are the real deal. CE & UL CERTIFIED!
3.4 cu ft Vacuum oven specifications
Electric
110V 50/60Hz 1PH 12.3A, 1350W
Chamber
Size: 15.75 x 15 x 23" deep
Material: Stainless Steel
Capacity: 3.4 cubic feet
Temperature control
Controller: microcomputer with LCD display
Range: ambient to 302°F
Display units: Fahrenheit or Celsius
Accuracy: +/- 0.1°F
Uniformity: +/- 0.5 at 100°F1 ControllerWarm-up time to 100°F: 40 minutes (without load)
Vacuum
Range: 0 to 76 cmHg (0 to 0.1MPa)
Vacuum port: KF25 flange x1, KF25 strait pipe with elbow x1, KF25 clamps and o-rings x2 (ALL INCLUDED)
Vent port: 3/8" female threaded
Weight
Unit: 255 Lbs, shipping: 423 Lbs
Dimensions (WxDxH)
Unit: 35 x 32 x 28"
Shipping: 42 x 39 x 39"
Shelves
10 removable shelves, 15 x 23" (WxD) each
Distance between shelves: 1.5"Area: 15x23" , 345 sq inches
Door gasket material
Food grade silicone
Observation window
3/5" tempered glass
Safety
Built-in circuit breaker, over-temp protector
In-door lights
LED
CE & UL compliance
Yes
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
Atlas Copco GVD28 1 Phase, 110-120/200-230V, 50/60Hz.
Pump oil and EMF20 with accessories are included.
Type of product: Vane Pump
Condition: New
Inlet: KF25
Exhaust: Hose Nipple
Motor: 1 Phase, 110-120/200-230V, 50/60Hz
Oil: Hydrocarbon
Pumping speed: 23.3 CFM (60 Hz)
Ultimate vacuum: 7.7 x 10-4 Torr (without gas ballast)
Weight: 97 lbs
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
Edwards E2M28, 1 Phase, 115-240V, 50/60Hz vacuum pump.
Pump oil and EMF20 with accessories are included.
Type of product: Vane Pump
Condition: New
Inlet: KF25
Exhaust: KF25
Motor: 1 Phase, 115-240V, 50/60Hz
Oil: Hydrocarbon
Pumping speed: 19.5 CFM (60Hz)
Ultimate pressure: 7.5 x 10-4 Torr (without gas ballast)
Weight: 97 lbs
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
Edwards E2M28, 1 Phase, 115-240V, 50/60Hz vacuum pump.
Pump oil and EMF20 with accessories not included.
Type of product: Vane Pump
Condition: New
Inlet: KF25
Exhaust: KF25
Motor: 1 Phase, 115-240V, 50/60Hz
Oil: Hydrocarbon
Pumping speed: 19.5 CFM (60Hz)
Ultimate pressure: 7.5 x 10-4 Torr (without gas ballast)
Weight: 97 lbs
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
Polyscience AD 7 Liter Heater. Laboratory liquid heating at your fingertips.
Description
Temperature range of 10°C to 200°C , 7 Liter Heating Circulator
Controller Type
Advanced Digital
Display
3.75" Touch-Pad LCD
Connectivity
Ethernet, USB A & B, RS232/addressable RS485, External Temperature Probe
Intuitive 3.75” (9.5 cm) display with touch pad control
Swivel 180™ rotating controller
On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, and external temperature probe
On-screen prompts
Automatic performance optimization and specific heat tuning
Single-point calibration capability
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
The Polyscience IP-80 Immersion Chiller has a custom condenser probe unit for cold traps. Continuous cooling to temperatures as low as -80°C.
Key Features:
Working Temperature Range C: -40°C to -80°C
Designed to run at maximum cooling
An economical alternative to dry ice or liquid nitrogen
Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids
Overall Dimensions (L x W x H) 20.1 x 15 x 22.3 in
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
Atlas Copco GVD28 1 Phase, 110-120/200-230V, 50/60Hz.
Pump oil and EMF20 with accessories not included.
Type of product: Vane Pump
Condition: New
Inlet: KF25
Exhaust: Hose Nipple
Motor: 1 Phase, 110-120/200-230V, 50/60Hz
Oil: Hydrocarbon
Pumping speed: 23.3 CFM (60 Hz)
Ultimate vacuum: 7.7 x 10-4 Torr (without gas ballast)
Weight: 97 lbs
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
Polyscience Heavy Duty 10HP 3 Phase Chiller will handle different tasks - dual 50L roto rating. When precision liquid cooling matters, go with Polyscience cooling solutions.
DuraChill® Chillers 2HP and up are not available outside of the United States
High capacity cooling for reactors
Displays temperature and pressure or flow rate simultaneously
User-adjustable temperature, pressure, and flow rate alarms
Simple operation and maintenance
Wide variety of options available
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
Polyscience AD 7 liter chiller/heater has an advanced digital 7L space saving refrigerated circulator, -40 to 200 deg C, 360W Cooling power @ 20 deg C, 1100W Heater, 4.3 psi (0.30 bar), 5.3 gpm (20.1 LPM), 120V, 60Hz. Polyscience chillers/heaters are powerful, low to high temperature units that are matched for use with rotary evaporators, vacuum systems, spectrometers, and other analytical equipment. They also are available with a mobile feature for convenient placement under a bench.
Intuitive 3.75” (9.5 cm) display with touch pad control
Swivel 180™ rotating controller
On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, and external temperature probe
On-screen prompts
Automatic performance optimization and specific heat tuning
Single-point calibration capability
Overall Depth:21.3 in H: 24.3 in W: 8.7 in
For more detailed information visit polyscience.comTo purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
6700 Polyscience series Heavy Duty 3/4 HP Chiller, Turbine Pump; 208-230V, 60Hz. Cooling Capacity at 20 deg C: 2300 W; Max Flow 3.5 gpm (13.2 l/min); Max Pressure 100 psi (6.9 bar)
Features
Large, dual displays present temperature and pressure or flow rate simultaneously
Compact, portable design takes up less floor space
Cooling at ambient temperatures as high as 35°C
Positive displacement pump
Choice of compressor sizes
User-adjustable temperature, pressure, and flow rate alarms
External temperature tracking and communications capability (optional)
Cool Command™, WhisperCool® (3/4 and 1 HP models)
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
6100 PolyScience Series 1 HP Chiller, Turbine Pump; 100 psi; 13.2 l/min, 1HP, 240V, 50Hz. Cooling Capacity at 20 deg C: 2750 W
Features
Large, dual displays present temperature and pressure or flow rate simultaneously
Compact, portable design takes up less floor space
Cooling at ambient temperatures as high as 35°C
Magnetic drive centrifugal pump
Choice of compressor sizes
User-adjustable temperature, pressure, and flow rate alarms
External temperature tracking and communications capability (optional)
Cool Command™, WhisperCool® (3/4 and 1 HP models)
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
Polyscience 1.5hp Heavy Duty Chiller LO/BP has a LOW OUTPUT/BACK PRESSURE return system. Exclusive to Summit, this 1.5hp offers more efficiency than the standard unit and comes in 100% stainless enclosure build out for a sexy look - 10l high temperature to 20l medium temperature rating for rotovaps. 220v
Small footprint conserves floor space
Displays temperature and pressure or flow rate simultaneously
User-adjustable temperature, pressure, and flow rate alarms
Simple operation and maintenance
For detailed information visit polyscience.comTo purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
Polyscience 5HP Heavy Duty 3 Phase Chiller will handle different tasks - 50L roto rating. When precision liquid cooling matters, go with Polyscience cooling solutions.
DuraChill® Chillers 2HP and up are not available outside of the United States
High capacity cooling for plasma torch cutting, machine tool hydraulics, high powered lasers, and other high heat generating processes and equipment
Displays temperature and pressure or flow rate simultaneously
User-adjustable temperature, pressure, and flow rate alarms
Simple operation and maintenance
Wide variety of options available
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
Polyscience AD 15 Liter chiller/heater are powerful, low to high temperature units that are matched for use with rotary evaporators, vacuum systems, spectrometers, and other analytical equipment. They also are available with a mobile feature for convenient placement under a bench.
KEY SPECS:
Controller Type
Advanced Digital
Display
3.75" Touch-Pad LCD
Connectivity
Ethernet, USB A & B, RS232/addressable RS485, External Temperature Probe
Languages Supported
4: French, German, Spanish, English
Swivel 180 Rotating Controller
Yes
Working Temperature Range °C
-40°c to 200°c
Temperature Stability °C
±0.01°
Fluid Optimization/Specific Heat Tuning
Automatic and/or user-adjustable
Temperature Calibration Capability
1-point
Working Access (L x W x D) (cm)
8.35 x 10.88 x 5.5 in
Pump Type
Pressure/Suction
External Temperature Control Capability
Yes
Flammability Class (DIN 12876-1)
III (FL)
Overall Depth:22.4 in H: 26.9 in W: 14.5 inTo purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.