A BINDER safety vacuum drying oven ensures maximum safety when drying organic solvents standard with TÜV/GS. The inner chamber of the VDL safety vacuum drying oven is designed according to ATEX guidelines 2014/34/EU Ex II 3/-G Ex h IIB T1-T3 Gc X.

Benefits

  • Fast and gentle drying
  • Direct heat transfer through large thermal conducting plates
  • Safe work with one-of-a-kind safety concept
  • Coordinated, modular system with vacuum pump and vacuum module
  • 2 year warranty

Important characteristics

    • Temperature range: room temperature plus 15 °C to 200 °C
    • ATEX compliance chamber’s interior: Ex II 3/-G Ex h IIB T1-T3 Gc X
    • APT.line™ preheating chamber technology
    • Controller with time-segment and real-time programming
    • 2 aluminum expansion racks
    • Inert gas connection
    • Shatterproof, spring-mounted safety glass panel
    • Pressurized instrument panel with compressed air connection
    • Pressure control device for heating activated < 125 mbar
    • Flame protection gasket
    • Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
    • Computer interface: RS 422
Performance Data Temperature
Heating-up time to 100 °C [min]80
Temperature fluctuation [± K]0.1
Temperature range 15 °C above ambient temperature to [°C]200
Temperature variation at 100 °C [± K]2
Vacuum Data
Leak rate [bar/h]0.01
Permitted end vacuum [mbar]0.01
Electrical data
Nominal power [kW]1.2
Phase (Nominal voltage)1~
Power frequency [Hz]50/60
Rated Voltage [V]230
Unit fuse [A]10
Connections
Compressed air connection for pressure-encapsulation8 mm
Inert gas connection with flow limiter (RP”)3/8
Measuring access port with small flange [DN mm]16
Vacuum connection with small flange [DN mm]16
Housing dimensions not incl. fittings and connections
Depth net [in]21.67
Height net [in]30.53
Width net [in]25.02
Internal Dimensions
Depth [in]13.4
Height [in]15.76
Width [in]15.76
Measures
Interior volume [cu.ft.]1.9
Load per rack [lbs]44
Net weight of the unit (empty) [lbs]209
Permitted load [lbs]99
Viewing window height [in]12.1
Viewing window width [in]13.79
Wall clearance back [in]3.94
Wall clearance sidewise [in]5.32
Fixtures
Number of shelves (std./max.)2/5
  1. All technical data is specified for unloaded units with standard equipment at an ambient temperature of +22 °C ±3 °C and a power supply voltage fluctuation of ±10%. The temperature data is determined in accordance to BINDER factory standard following DIN 12880, observing the recommended wall clearances of 10 % of the height, width, and depth of the inner chamber. All indications are average values, typical for units produced in series. We reserve the right to change technical specifications at any time.

 

Further information (Data Sheets, Operating Manuals and Technical Drawings) can be downloaded from BINDER.

Shipping not included with this new item