-
The 29 SPD Discharge Adapter fits directly onto any glass 29/42 male or into a 29/42 KF25 adapter. Threads are 1/4 BSPP. Single adapter only. 100% Billet stainless steel and 100% USA made.
-
The UHVP Sensor 8 Scale is for the SVG-3 or Apollo Vacuum Gauge. This is a post upgrade to work the 3rd UHVP port. The K.J. Lester Vacuum Gauge is the workhorse for all vacuum measurement applications. This controller combines two sensor systems into one small device to measure from atmosphere to 1x10 – 9 mbar. The patented ultra-low magnetic stray field design opens up a whole new range of applications. A unique interchangeable dual chamber sensor unit avoids cleaning cycles and reduces maintenance, making it the most robust and economical vacuum gauge of its kind. KF25 flange.
-
The Swagelok DV-2 is a ball and needle 3/8 dual pump valve kit. A high vacuum, 2 piece valve setup, rated for up to 8/9 scale. This item itself is a major tool in controlling vacuum or bleeding atmosphere into pump without risking any leak point. Swagelok is leading the industry in these types of valves. See for yourself: swagelok/valves
-
The SVC-1 Summit Vacuum Control is used for chemical duty solvent recovery or vacuum control. Either for rotary evaporators, filtration or recovering highly volatile solvents. This unit was designed and produced on the market to establish a new standard, with new circuit boards, PTFE valves and the LEAST amount of parts compared to any competitor units - the SVC-1 makes a new standard in high flow vacuum regulation and control. The vacuum regulator is particularly useful when you are looking to maintain pressure at a certain level as needed for botanical processing and rotary evaporation. Mounting can be bench-top or on a laboratory pole.
- Display of both the set-point and current vacuum control
- Fine control of target vapor pressure for more precise compound separation through distillation
- Flow path designed to be tolerant of harsh chemicals
- CE and RoHS Certified
- Fine Grained Vacuum Control
- Simultaneous display of both current vacuum and set point
- Direct, easy set point setting
- Remote control via USB
- Keeps your pump oil away from your process
- Enables using reliable and long lasting rotary vane oil pumps in applications where diaphragm pumps were previously required
- Keeps vacuum pumps near their base pressure resulting in longevity, fewer oil changes and less oil mist
- Simple to use Interface
- Flow path designed to be tolerant of harsh chemicals
- Use of larger orifice parts results in much faster pump-downs
-
Looking to take your short path system to the next level? A diffusion pump will provide deeper vacuum and lower temps resulting in higher efficiency and increased speed. Package comes with an Edwards 30 roughing pump, the adapters to connect the diffusion, chiller to control temperatures and custom built and tuned SVG-3 setup with UHVP Sensor.
- High rate Diffusion Pump
- Adapters to fit
- 3/4 HP Chiller
- E2M30 kit
- SVG-3 (3 zone gauge)
- UHVP Sensor
-
$2,800.00
The Sogevac single stage rotary vane pumps are required for any sized hardpiped system and can be very useful on hosed systems as well.- Inlet: KF40
- Motor: 1 Phase, 180/264V, 50/60Hz, 1.5kW, 12A
- Oil: synthetic hydrocarbon
- Pumping speed: 31 CFM (60Hz)
- Ultimate pressure: 0.5 mbar
- Compact design and small footprint
- Very low and constant noise level in any working condition
- Simplified maintenance
-
100g Long term lubrication for high temperature applications under the influence of aggressive media up to 250C. Klübertemp GR RT greases are white, homogeneous long-term greases based on perfluorinated polyether oils (PFPE) and polytetrafluoroethylene (PTFE). This series contains greases with a range of specific additives for use in different applications. Klübertemp GR RT 15 shows good compatibility with plastics and elastomers, enabling a wide range of component materials to be selected. Vapor pressure of 2.0 x 10⁸ Torr at 20°C Vapor pressure of 4.7 x 10⁶ Torr at 100°C
-
The KF40 O Ring will fit between any KF40 flange while using a KF40 clamp. Made from Viton and stainless steel.
-
The KF40 Clamp combined with KF40 O Ring form a vacuum tight seal between the connection flanges. This circumferential clamp is used for connecting standard NW40 / KF40 vacuum components. Aluminum clamp with butterfly nut for easy tightening.
-
The KF40 Bellow is a corrugated stainless steel pipe that connects to corresponding kf40 flanges. These malleable pipes allow for some error as apposed to hooking up a solid straight pipe. Available in 24 and 36 inch lengths. Don't forget other KF40 fittings and accessories: 100% stainless steel. 100% USA made. Bellow warning: Stretch and bend your bellow into position before installation. Engaging your pump(s) while not doing so could make the bellow jolt/jostle, putting stress on or damage glassware, voiding limited warranties. KF40 Bellow
-
Billet stainless steel adapter that reduces the diameter of your KF vacuum pipe. KF40 to KF25 flange. Summit has corresponding KF25 and KF40 products in our Stainless Steel section.
-
KF25 Straight Pipe is an 8 inch stainless steel high vacuum pipe. KF25 Flanges. Summit has other KF25 products in our Stainless Steel section. Looking for a specific length?.. we might be able to help! Call us
-
KF25 O Ring will fit between any KF25 flange while using a KF25 clamp. Made from Viton and stainless steel.
-
Sale!The KF25 cross is a staple in most larger vacuum systems that require that extra flange for vacuum gages or other high vacuum devices. Built to last with 304 stainless steel and superior TIG welding. All KF flanges connect with o-ring and clamp (links below). Cross is 4 inch end to end.
-
The KF25 Clamp combined with KF25 O Ring form a vacuum tight seal between the connection flanges. This circumferential clamp is used for connecting standard NW25 / KF25 vacuum components. Aluminum clamp with butterfly nut for easy tightening.
-
The KF25 Bellow is a corrugated stainless steel pipe that connects to corresponding kf25 flanges. These malleable pipes allow for some error as apposed to hooking up a solid straight pipe. Available in 10, 20 and 40 inch lengths. Don't forget other KF25 fittings and accessories: 100% stainless steel. 100% USA made. Bellow warning: Stretch and bend your bellow into position before installation. Engaging your pump(s) while not doing so could make the bellow jolt/jostle, putting stress on or damage glassware, voiding limited warranties. KF25 Bellow
-
The KF25 Adapter 34/45 is typically used to convert a glass system to a vacuum system or sensor. Hook up to a bellow, Straight Pipe, KF25 sensor or any KF25 flange. Secure your glass to steel connection with a keck clip. Stainless billet parts made right here in the USA.
-
The KF25 Adapter 29/42 is typically used to convert a glass system to a vacuum system or sensor. Hook up to a bellow, Straight Pipe, KF25 sensor or any KF25 flange. Secure your glass to steel connection with a keck clip. Stainless billet parts made right here in the USA.
-
The KF25 Adapter 24/40 is typically used to convert a glass system to a vacuum system or sensor. Hook up to a bellow, Straight Pipe, KF25 sensor or any KF25 flange. Secure your glass to steel connection with a keck clip. Stainless billet parts made right here in the USA.
-
KF25 stainless steel 90 degree elbow for high vacuum applications. Don't forget your clamps! Summit has other KF25 products in our Stainless Steel section.
-
Adapter fits any KF25 flange with KF25 o-ring and KF25 clamp. Threads are 0.25 inch BSPP. Commonly used for wipers (wiped film or rolling film) using Summit Discharge Pumps. Single adapter only. 100% Billet stainless steel and 100% USA made.
-
KF16x25 Reducer. Stainless steel adapter that reduces the size of your vacuum pipe diameter. Summit has other KF25 products in our Stainless Steel section.
-
KF16x10 Centering Ring. Viton rubber and stainless steel. Used with breather valves and barbs. Comes in the KF Breather Valve Kit. 100% USA made.
-
The KF16 to Male 24/40 PTFE Adapter is typically used to convert a glass system to a vacuum system or sensor. Adapter has 11mm bore. Secure your male connection with a keck clip. PTFE billet parts made right here in the USA. Be sure to have KF16x10 Centering Ring and KF16 clamp to make your KF16 connection.
-
KF16 O Ring will fit between any KF16 flange while using a KF16 clamp. Made from Viton and stainless steel.
-
The KF16 Clamp combined with KF16 O Ring form a vacuum tight seal between the connection flanges. This circumferential clamp is used for connecting standard NW16 / KF16 vacuum components. Aluminum clamp with butterfly nut for easy tightening.
-
AV 10k airvalve KF breather valve. 100% USA made. In conjunction with: Or get them all together in the Breather Valve Kit
-
$248.00
I 19 Standard Vacuum Pump Fluid. 5 Gallons (18.927 Liters) Hydrocarbon fluid for mechanical vacuum pumps used in non-corrosive applications. This premium grade oil produces lower vapor pressures, reduced backstreaming, and has longer fluid life. sds To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing. -
$3,400.00
Simple yet powerful, the GVS40A uses displacement and horsepower to achieve CFM. Unlike many other types of pumps that require complex fore traps, cryotraps, etc. – a well maintained single stage rotary vane can withstand great amounts abuse; making them very affordable and usable without much worry. Also know as 'roughing', 'wet' or 'backing' pumps. The GVS40A rotary vane pump is required for any sized hard-piped system and can be very useful on hosed systems as well.- Inlet: KF25
- Exhaust: 1 1/4" female threaded (ID)
- Motor: 1 Phase, 180/264V, 50/60Hz
- Oil: synthetic hydrocarbon
- Pumping speed: 31 CFM (60Hz)
- Ultimate pressure: 0.4 Torr
-
$14,999.99
New GVD80 + New EMF100 Filter + 5 gal oil Edwards GVD80 series two stage oil sealed rotary vane vacuum pumps are renowned for their high ultimate vacuum, rapid pumping speeds, quiet operation and ability to handle water vapor. These direct drive rotary vane pumps are inherently compact and vibration free, and with their finger-proof fan and coupling housings they offer excellent operator protection. We also carry GVD28s for smaller applications. We get our pumps from a thermo fisher service and testing centers. Some are brand new never used. Some are used for 30 days to 30 hours max. All are chemically cleaned, and restored to brand new condition with 99-100% test motors with factory Edwards full parts kit. Everything replaced. Comes with a 6 months unconditional warranty other than direct misuse. This beast is ready to serve you.Pump comes with :- GVD80 pump 3-phase
- 5 gallons I 19 Standard
- New EMF100 filter
- Comes standard with KF40 connections
-
$6,793.75
Atlas Copco GVD28 1 Phase, 110-120/200-230V, 50/60Hz. Pump oil and EMF20 with accessories are included.- Type of product: Vane Pump
- Condition: New
- Inlet: KF25
- Exhaust: Hose Nipple
- Motor: 1 Phase, 110-120/200-230V, 50/60Hz
- Oil: Hydrocarbon
- Pumping speed: 23.3 CFM (60 Hz)
- Ultimate vacuum: 7.7 x 10-4 Torr (without gas ballast)
- Weight: 97 lbs
-
$4,685.00
Atlas Copco GVD28 1 Phase, 110-120/200-230V, 50/60Hz. Pump oil and EMF20 with accessories not included.- Type of product: Vane Pump
- Condition: New
- Inlet: KF25
- Exhaust: Hose Nipple
- Motor: 1 Phase, 110-120/200-230V, 50/60Hz
- Oil: Hydrocarbon
- Pumping speed: 23.3 CFM (60 Hz)
- Ultimate vacuum: 7.7 x 10-4 Torr (without gas ballast)
- Weight: 97 lbs
-
The EMF20 Filter attaches to your Edwards pump. This filter captures oil mist from the outlet of pumps, which would otherwise be ejected into the atmosphere. Comes with clamp and O-ring. Call for pricing and availability. To purchase, please contact Summit Research at 831-226-2948 or by eMail.
-
$14,095.00
Specifications- Type of Product: Scroll Pump
- Manufacturer: Edwards
- Condition: New
- Part Number: A73001983
- Inlet: KF40
- Exhaust: KF25
- Motor: 1 Phase, 100-120/200-230V, 50/60Hz
- Pumping speed: 21 CFM
- Ultimate vacuum: 8 x 10-3 Torr
- Weight: 105 lbs
- closed loop temperature monitoring
- dry, clean vacuum free of lubricants
- simple, single-sided scroll design
- patented isolated bearing shield
- world-wide voltage compatibility
- low power consumption
- controllable gas ballast
- inverter driven motor
-
The Edwards Speedivalve (sp25k) is a diaphragm sealed in-line, isolation valve. The construction consists essentially of a flexible elastomeric diaphragm which is sealed onto a lightly polished seat by a screw thread mechanism. The valve terminates in NW flanges and can be pipeline supported or panel mounted. Fits on all your KF25 flanges. Summit recommends these KF25 parts for this item:Easy to operate with visual indication of valve open (SP10K to SP25K). Leak tight to better than 10-6 mbar ls-1 / 8 x 10-7 Torr ls-1. Diaphragm completely isolates mechanism from vacuum system. Will withstand 9 bar overpressure (SP10K to SP40K, with Co-Seal)
-
Mechanical valve for the use with Apollo Vacuum Controller or SVG-3 This KF25 elbow valve works by throttling the pressure between the vacuum pump and the process to control the vacuum level or to isolate the vacuum pump | Enables vacuum pressure control using a solenoid valve for throttling pump suction
- Control range: 10 millitorr to 6 Torr
- Measurement range: 1 millitorr to 760 Torr
- Range with accuracy: 10 millitorr to 6 Torr
- Benefits of throttle control: With the KF25 1″ orifice you get better and faster throughput | ideal for processing high volumes | Extends life of pump by enabling pump to run closer to it’s base pressure
- Vacuum control—Regulate the vacuum level between the vacuum pump and the chamber or process. It creates a pressure drop between the two, thereby allowing the process to operate at a set pressure while the pumps’ pressure varies based on loading. Helps prolong the life of your vacuum pump!
- Vacuum controller applications: Vacuum Ovens, Vacuum Furnaces, Vacuum Bagging or Composites
- Botanical processing: Rotary Evaporation, Short Path Distillation (1 Head Kit), Extractions
- Use case example— To maintain specific pressure levels in a vacuum oven at about 2 Torr to avoid removing target terpenes and only removing water
-
$16,710.00
Rebuilt Edwards E2M80 + Blower (mechanical booster) All air cooled dual stage Rotary Vane Pump, 208 V, 50 Hz/208-230 V, 60 Hz/460 V, 60 Hz, Three Phase with KF-40 inlet to blower. Edwards E2M series two stage oil sealed rotary vane vacuum pumps are renowned for their high ultimate vacuum, rapid pumping speeds, quiet operation and ability to handle water vapor. These direct drive rotary vane pumps are inherently compact and vibration free. Blowers add a dimension of vacuum that tops most dual pump options. Mechanical boosters feature the unique hydro-kinetic drive that provides pump down times cut by 50%, when compared with direct drive pumps, no bypass lines or pressure switches required, universal voltage motors, reduced capital and operating costs, air cooled motors – with water cooled options, and quiet, minimum vibration. Operating at relatively low pressures, the mechanical booster pump is not exposed to the same concentrations of corrosive process media as is the backing pump, which makes it highly reliable. Comes with Pump, Blower, MF100 filter and I 19 Standard fluid. To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing. -
$9,630.49
Rebuilt Edwards E2M40 + Blower (mechanical booster) All air cooled dual stage Rotary Vane Pump, 208 V, 50 Hz/208-230 V, 60 Hz/460 V, 60 Hz, Three Phase with KF-40 inlet to blower. Edwards E2M series two stage oil sealed rotary vane vacuum pumps are renowned for their high ultimate vacuum, rapid pumping speeds, quiet operation and ability to handle water vapor. These direct drive rotary vane pumps are inherently compact and vibration free. Blowers add a dimension of vacuum that tops most dual pump options. Mechanical boosters feature the unique hydro-kinetic drive that provides pump down times cut by 50%, when compared with direct drive pumps, no bypass lines or pressure switches required, universal voltage motors, reduced capital and operating costs, air cooled motors – with water cooled options, and quiet, minimum vibration. Operating at relatively low pressures, the mechanical booster pump is not exposed to the same concentrations of corrosive process media as is the backing pump, which makes it highly reliable. Comes with Pump, Blower, MF100 filter and I 19 Standard fluid. To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing. -
$3,325.00
Factory rebuilt We get our rebuilt pumps from a Thermo Fisher Testing Center. All are chemically cleaned, and restored to brand new condition with 99-100% test motors with factory Edwards full parts kit. Everything replaced and serviced regardless of condition by the nations leading Edwards warranty center. Comes with a warranty, all pumps are tested in house to manufactures ratings prior to shipping.Pump comes with:- Edwards 30 pump 220v
- 5 gallons I 19 Standard oil
- New emf20 filter
-
$7,275.00
Edwards E2M28, 1 Phase, 115-240V, 50/60Hz vacuum pump. Pump oil and EMF20 with accessories are included.- Type of product: Vane Pump
- Condition: New
- Inlet: KF25
- Exhaust: KF25
- Motor: 1 Phase, 115-240V, 50/60Hz
- Oil: Hydrocarbon
- Pumping speed: 19.5 CFM (60Hz)
- Ultimate pressure: 7.5 x 10-4 Torr (without gas ballast)
- Weight: 97 lbs
-
$6,831.25
Edwards E2M28, 1 Phase, 115-240V, 50/60Hz vacuum pump. Pump oil and EMF20 with accessories not included.- Type of product: Vane Pump
- Condition: New
- Inlet: KF25
- Exhaust: KF25
- Motor: 1 Phase, 115-240V, 50/60Hz
- Oil: Hydrocarbon
- Pumping speed: 19.5 CFM (60Hz)
- Ultimate pressure: 7.5 x 10-4 Torr (without gas ballast)
- Weight: 97 lbs
-
The Discharge Pump allows you to remove fluid from your system without breaking vacuum. This would replace the need for receiving flasks. Controller box allows you to regulate heat and speed at the touch of a finger. You will need to elevate/modify your current short path system to utilize this pump. Instagram Demo Included:
- Discharge Pump
- Pump Controller
-
Invoil 32 is a premium diffusion pump oil with a specially developed double-distilled diffusion pump fluid. This hydrocarbon is modified for high temperature use with a strong antioxidant. Its properties include increased resistance to decomposition and improved stability against oxidation.
Specifications Vapor Pressure at 25ºC (torr) 5x10-6 Boiling Point at .01 torr (ºC) 127 Viscosity at 40ºC (cSt) 58 Viscosity at 100ºC (cSt) 8.5 Pour Point (ºC) -10 Flash Point (ºC) 241 Fire Point (ºC) 271 Density at 25ºC (g/ml) 0.86 -
$6,500.00
Diffusion pump 06A with high volume operation at UHVP rates. This 06A is the larger of the two diff pumps we sell, satisfies requirements for 12 liter short path setups and over. Liquid cooled pump well-suited for use in chemical manufacturing, where large quantities of gas have to be pumped away as quickly as possible. With no moving parts, these pumps are rugged and extremely reliable. Stainless steel is used for the pump bodies in order to minimize outgassing of the pumps, eliminate corrosion and to ensure a long operating lifetime of the pump. In short, diffusion pumps provide deeper vacuum and lower temps resulting in higher efficiency and increased speed. Comes with $900 dollars in flanges, connectors and diff oil. Comes stock with KF40 flanges but can always be sized (KF25, KF16, ECT). To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing. -
$5,791.48
Diffusion pump 04A with high volume operation at UHVP rates. This 04A is the smaller of the two diff pumps we sell, satisfies requirements for 12 liter short path setups and under. Liquid cooled pump well-suited for use in chemical manufacturing, where large quantities of gas have to be pumped away as quickly as possible. With no moving parts, these pumps are rugged and extremely reliable. Stainless steel is used for the pump bodies in order to minimize outgassing of the pumps, eliminate corrosion and to ensure a long operating lifetime of the pump. In short, diffusion pumps provide deeper vacuum and lower temps resulting in higher efficiency and increased speed. Comes with $900 dollars in flanges, connectors and diff oil. Comes stock with KF25 flanges but can always be sized (KF40, KF16, ECT). To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing. -
$3,600.00 $3,000.00
One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors at low vacuum requirement. In contrast to waterjet pumps they do not consume water and therefore do not produce any contaminated waste water in daily use. Typical applications are vacuum ovens, filtrations and multi-port manifolds for medium throughput, as well as pumping of gases and oil-free evacuation in general. The one-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. Diaphragm Pump 2 Head MZ2NT To purchase, please contact Summit Research at 8312262948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing. -
Sale!The CVC-3000 manages vacuum processes by controlling vacuum pumps, vacuum and coolant valves and accessories. The illuminated graphical display with clear text menus (14 languages) and the jog wheel make its handling nearly self-explanatory. Depending on the model, a ceramic diaphragm vacuum sensor and venting valve are already integrated (or externally connectable). The ceramic vacuum sensor is chemically highly resistant, measures gas-type independent and accurately. This controller offers a two-point vacuum control mode via in-line solenoid valve. Ten fully configurable programs (with up to ten time and pressure steps each, and control functions such as venting and pumping) can be easily edited and stored. External valves and sensors for liquid level and vacuum down to the fine vacuum range are easy to connect and recognized automatically via the VACUU·BUS® control system. The CVC-3000 enables the measurement of relative pressure with regard to a reference sensor (VSK 3000).
CVC-3000 Performance features
- controls vacuum, cooling water and venting on demand
- intuitive operation with turn-and-tap jog wheel and clear text menus, with integrated venting valve
- interactive communication (PC) through RS 232C serial interface
- self-configuring due to VACUU·BUS® system: valves (vacuum, venting, coolant), sensors (vacuum, liquid level), Peltronic® condenser
-
This is a high precision inert gas regulation valve assembled at Micro Matic & calibrated at DigiVac.
- Forged brass and die cast for durability
- O-Ring inlet seal at tank connection
- Set screw pressure adjustment
- Flow control inlet
- Calibrated exclusively to the Summit sweep valve & vacuum controller