- Forged brass and die cast for durability
- O-Ring inlet seal at tank connection
- Set screw pressure adjustment
- Flow control inlet
- Calibrated exclusively to the Summit sweep valve & vacuum controller
-
$7,200.00 - $8,200.00
Effective capture of moisture or condensation. Also useful as quick cooling baths.- Digital temp controller up to -80c
- Stainless steel trap installation
- Easy internal observation with transparent enclosing
- Seamless structure bath to prevent leakage of fluid
Model Number SH-WB-5GDR Temp Controller Microprocessor digital controller Temp Control Range Ambient -80c ~ -20c (low limit -80c) Internal Cylinder Dimension 7.09W" x 8.27H" External Dimension 18.18W" x 22.04D" x 27.95H" Weight 48 Kg Internal Material Stainless steel External Material Steel plate with powder heating coated Trap Stainless steel trap Power 110V, 60Hz, 15A -
$205.00
Powder coated blue steel ACME Lab Stand and 48 inch threaded vertical rod (w nut and washer). Stand base measures 9x11 inches. *Must use this stand for 50 liter setups. Available in 36 inch To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing. -
Pressurized fluid and solution stainless steel handling keg. 2 inch diameter tri-clamp. Full chemical duty. Choice of 5 gallon or 15 gallon. Whether running hot or cold, pressurized or not, these durable kegs get the job done. Made in USA. Comes with clamp, o-ring, two port lid and 3/8 nipples. Keg measures 26inches x 9inches.
-
Pressurized fluid and solution stainless steel handling keg. 2 inch diameter tri-clamp. Full chemical duty. Choice of 5 gallon or 15 gallon. Whether running hot or cold, pressurized or not, these durable kegs get the job done. Made in USA. Comes with clamp, o-ring, two port lid and 3/8 nipples. Keg measures 26inches x 15.5inches.
-
Adapter fits any KF25 flange with KF25 o-ring and KF25 clamp. Threads are 0.25 inch BSPP. Commonly used for wipers (wiped film or rolling film) using Summit Discharge Pumps. Single adapter only. 100% Billet stainless steel and 100% USA made.
-
$39,000.00
Summit Research's USA manufactured, peer reviewable Closed Loop Systems (CLS) is the highest quality system in the industry. The standard purchase package, as shown, is a passive system with a built in cryogenic cooler. The system does not require chillers to operate as it was designed to heat on the recovery side, generating vapor for recovery via the coil condensation of the hydrocarbons. Included:- Populated Rack with Material Column
- Filtration Sock
- CRC/Remediation
- Collection Column
- Drier
- Complete Swagelok Tubing and Attachments
- Valves
- Supports
- Safety Valves/PRV's
- ASME Solvent Storage Tank
- Plate Exchanger (For use with LN2 or Chiller)
- Recovery Coils
- Jacketed Vessels
Additional options that can be added:- Recovery pump
- Heaters
- Ancillary hardware
With a 360 design the CLS fits the most features into the smallest footprint on the market allowing for ease of use while taking up a limited amount of space. (Plated Heat Exchanger now incorporated into base of this unit for even smaller footprint) This versatile system combines features for both crude cannon work and detailed high grade tuned extractions into one. No feature or expense is spared in the manufacturing of Summit Research's CLS allowing customers top of the line equipment at an affordable price.One of our customers using the CLS: Instagram Demo To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing. -
$5,791.48
Diffusion pump 04A with high volume operation at UHVP rates. This 04A is the smaller of the two diff pumps we sell, satisfies requirements for 12 liter short path setups and under. Liquid cooled pump well-suited for use in chemical manufacturing, where large quantities of gas have to be pumped away as quickly as possible. With no moving parts, these pumps are rugged and extremely reliable. Stainless steel is used for the pump bodies in order to minimize outgassing of the pumps, eliminate corrosion and to ensure a long operating lifetime of the pump. In short, diffusion pumps provide deeper vacuum and lower temps resulting in higher efficiency and increased speed. Comes with $900 dollars in flanges, connectors and diff oil. Comes stock with KF25 flanges but can always be sized (KF40, KF16, ECT). To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing. -
$6,500.00
Diffusion pump 06A with high volume operation at UHVP rates. This 06A is the larger of the two diff pumps we sell, satisfies requirements for 12 liter short path setups and over. Liquid cooled pump well-suited for use in chemical manufacturing, where large quantities of gas have to be pumped away as quickly as possible. With no moving parts, these pumps are rugged and extremely reliable. Stainless steel is used for the pump bodies in order to minimize outgassing of the pumps, eliminate corrosion and to ensure a long operating lifetime of the pump. In short, diffusion pumps provide deeper vacuum and lower temps resulting in higher efficiency and increased speed. Comes with $900 dollars in flanges, connectors and diff oil. Comes stock with KF40 flanges but can always be sized (KF25, KF16, ECT). To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing. -
$87,000.00
Automated Falling Film Evaporator With control box now built in, footprint has gotten smaller: ʰ81 x ʷ48 x ᵈ32 *Please allow 10 inches out the top to remove/place inlet/intake piece (91 inch total). Safety systems built in This is for Package 1 FFE unit with fluid discharge pumps and certified control box (remote), other pricing options should be handled via direct contact with Summit. Sales of the FFE unit at this price include the entire skid with heating/condensing features along with variable speed controlled chemical duty diaphragm pumps and all corded electrical control panel and components. This price does not include any chillers/heaters/vacuum related sub components for each of those ancillary hardware connections. The setup as shown is made for alcohol. Pentane or more caustic solvents require a $10,000 upgrade for pump compatibility. Package 1 : TAP WATER 40 g/hr FFE + Pumps + Skid only Please call us for package pricing and availability. We can tailor these units to suit your needs. Thank you for looking To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing. -
$62,500.00
The SPD 100L Reactor is used for reactions, crystallizations, drying or evaporating solvent from crystallization processes. Evaporation range meets or exceeds 50L Roto performance.- 100 Liter, with head space included (~115L total capacity to vapor duct)
- Heavy duty large opening lid
- Heavy duty mixer, mounted VFD custom made and installed to oversize lid
- Pressure safe sight glasses
- Dimpled liquid jacket with flow control internally
- Second jacket with insulator packed in void from bottom to top
- Stainless stand, heavy duty with caster wheels
- Customer option for discharge pump, or dual keg (add on)
- Stainless steel, patented hard pipe SPD8 coil distillation head
- Discharge plate for solvent separation in high flow
- Sight glass installed for monitoring of head discharge
- Vacuum port on top of head for vacuum range
- Pharma and GMP grade construction
- Total dimensions with frame and casters: H 95" W 45" D 37"
-
The KF40 Bellow is a corrugated stainless steel pipe that connects to corresponding kf40 flanges. These malleable pipes allow for some error as apposed to hooking up a solid straight pipe. Available in 24 and 36 inch lengths. Don't forget other KF40 fittings and accessories: 100% stainless steel. 100% USA made. Bellow warning: Stretch and bend your bellow into position before installation. Engaging your pump(s) while not doing so could make the bellow jolt/jostle, putting stress on or damage glassware, voiding limited warranties. KF40 Bellow