-
Boiling Flask 22L-3N-USPD is made from high quality Schott glass and is a Rundkolben (triple offset joints) design with 24-24-55 ports. This flask has a horizontal port which fits exclusively to our USPD Head. Accept no imitations, the dimensions and geometry of the joints are original concepts brought to market by Summit Research. We strive to provide the best products for your needs. 22 Liter round bottom flask with 55/50 horizontal main port. Fits exclusively with: Ultra Short Path Distillation Head (Head) Cold Trap USPD Triple (Cold Trap) As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Boiling Flask 22L-3N-USPD -
First of its kind, innovation and performance meet the future of distillation. The Ultra Short Path Distillation Micro Head (previously SPD-7.1) is a fascinating technology inspired by an ultra low temperature process. The Summit research SPD-7.1 is a horizontal head designed to fully refine products at a low temperature; preferred material required should be refined previously, or physically refined through all filtration and washing/chroma processes prior to running through this system. Material must be completely dried and full vacuum cannot be engaged if material is wet. Do not attempt to load green/black crude material. This system requires much more vacuum requirement so please keep in mind the 22 liter system takes a diffusion, and the 5 liter system can use dual e2m28/30. With a high flow dual condenser coil to GL18 adapters, the temps are dialed in throughout this horizontal head. Big bore 45/50 inlet and outlet with a traditional 29/42 discharge to flask. Wait, there's more! This head acts as a large swing arm, so you can swing and engage the flask to your targeted fraction. See the SPD7 in action (pt1): Instagram Demo
See the SPD7 in action (pt2): Instagram Demo
Head, KF25 adapter and GL18s (2) included.
Glassware (boiling flask & cold trap) exclusive to this ultra short path head:
- RBF-5L-3N-USPD (Boiling Flask)
- CT-USPD Micro Dual Coil (Cold Trap)
-
First of its kind, innovation and performance meet the future of distillation. The Ultra Short Path Distillation Head (previously SPD-7) is a fascinating technology inspired by an ultra low temperature process. The Summit research SPD-7 is a horizontal head designed to fully refine products at a low temperature; preferred material required should be refined previously, or physically refined through all filtration and washing/chroma processes prior to running through this system. Material must be completely dried and full vacuum cannot be engaged if material is wet. Do not attempt to load green/black crude material. This system requires much more vacuum requirement so please keep in mind the 22 liter system takes a diffusion, and the 5 liter system can use dual e2m28/30. With a high flow triple condenser coil to GL18 adapters, the temps are dialed in throughout this horizontal head. Big bore 55/50 inlet and outlet with a traditional 29/42 discharge to flask. Wait, there's more! This head acts as a large swing arm, so you can swing and engage the flask to your targeted fraction. See the SPD7 in action (pt1): Instagram Demo
See the SPD7 in action (pt2): Instagram Demo
Head, KF25 adapter and GL18s (2) included.
Glassware (boiling flask & cold trap) exclusive to this ultra short path head:
- RBF-22L-3N-USPD (Boiling Flask)
- CT-USPD Triple Coil (Cold Trap)
-
$6,000.00
Size not available? New Genesis Mantles are in stock. Exciting features, intuitive touch screen technology and ground breaking up and down heating. Please contact Summit for more information or to get your mantle calibrated today! FREE ATHENA SOFTWARE (Techno Heat Mantle compatibility) Included with this digital touch screen mantle and high power heating system:- Mantle
- Touch Screen Unit
- Controlled Heating Insulator Cap
- Dual Vapor Probes (with one backup each)
- Power Cable
Techno Heat Mantle being calibrated: Instagram Demo
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Each order comes with a brief consultation to determine your desired setup. Calibrations will be performed by Summit Research Technicians on 236v/60hz power using a NIST traceable and certificate-held thermocouple measurement device. Units ship 1-3 days after orders have been processed and calibrations have been completed unless otherwise specified. -
Out of stock
Size not available? New Genesis Mantles are in stock. Exciting features, intuitive touch screen technology and ground breaking up and down heating. Please contact Summit for more information or to get your mantle calibrated today! FREE ATHENA SOFTWARE (Techno Heat Mantle compatibility) Included with this digital touch screen mantle and high power heating system:- Mantle
- Touch Screen Unit
- Controlled Heating Insulator Cap
- Dual Vapor Probes (with one backup each)
- Power Cable
Techno Heat Mantle being calibrated: Instagram Demo
This size mantle is out of stock.
-
Out of stock
Size not available? New Genesis Mantles are in stock. Exciting features, intuitive touch screen technology and ground breaking up and down heating. Please contact Summit for more information or to get your mantle calibrated today! FREE ATHENA SOFTWARE (Techno Heat Mantle compatibility) Included with this digital touch screen mantle and high power heating system:- Mantle
- Touch Screen Unit
- Controlled Heating Insulator Cap
- Dual Vapor Probes (with one backup each)
- Power Cable
Techno Heat Mantle being calibrated: Instagram Demo
This size mantle is out of stock. -
$3,000.00
Size not available? New Genesis Mantles are in stock. Exciting features, intuitive touch screen technology and ground breaking up and down heating. Please contact Summit for more information or to get your mantle calibrated today! FREE ATHENA SOFTWARE (Techno Heat Mantle compatibility) Included with this digital touch screen mantle and high power heating system:- Mantle
- Touch Screen Unit
- Controlled Heating Insulator Cap
- Dual Vapor Probes (with one backup each)
- Power Cable
Techno Heat Mantle being calibrated: Instagram Demo
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Each order comes with a brief consultation to determine your desired setup. Calibrations will be performed by Summit Research Technicians on 236v/60hz power using a NIST traceable and certificate-held thermocouple measurement device. Units ship 1-3 days after orders have been processed and calibrations have been completed unless otherwise specified. -
$10,585.00
Presenting the Atlas Copco 7.5 HP air compressor. This is a single stage, air cooled, oil injected, rotary screw compressor with integrated dryer and 53 gallon tank (tank upgrades available, please contact us). 21.2 cfm. Also included:- compressor
- drive motor
- oil & air system
- electro-pneumatic controls
- coalescing filter
- oil water separator
- auto tank drain
- Powerful & reliable solution for small & medium sized industries
- Manufactured & tested to meet ISO 9001, ISO 14001 & ISO 1217
- Cools the compressed air & removes the water before it enters your network
- Prevents rust in compressed air piping & avoids damage to air tools
- Water separator with electronic no-loss water drain included
- Enclosure reduces sound levels so you work nearby
- Optimized cooling air flow enhances quiet operation
- Grouped together & accessible through the removable panel
- Spin-on oil separator & filter are easy to maintain
-
$9,669.00
Presenting the Atlas Copco 5 HP air compressor. This is a single stage, air cooled, oil injected, rotary screw compressor with integrated dryer and 53 gallon tank. 16.6 cfm. Also included:- compressor
- drive motor
- oil & air system
- electro-pneumatic controls
- coalescing filter
- oil water separator
- auto tank drain
- Powerful & reliable solution for small & medium sized industries
- Manufactured & tested to meet ISO 9001, ISO 14001 & ISO 1217
- Cools the compressed air & removes the water before it enters your network
- Prevents rust in compressed air piping & avoids damage to air tools
- Water separator with electronic no-loss water drain included
- Enclosure reduces sound levels so you work nearby
- Optimized cooling air flow enhances quiet operation
- Grouped together & accessible through the removable panel
- Spin-on oil separator & filter are easy to maintain
-
$3,000.00
Polyscience AD 7 Liter Heater. Laboratory liquid heating at your fingertips.Description Temperature range of 10°C to 200°C , 7 Liter Heating Circulator Controller Type Advanced DigitalDisplay 3.75" Touch-Pad LCDConnectivity Ethernet, USB A & B, RS232/addressable RS485, External Temperature Probe- Intuitive 3.75” (9.5 cm) display with touch pad control
- Swivel 180™ rotating controller
- On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, and external temperature probe
- On-screen prompts
- Automatic performance optimization and specific heat tuning
- Single-point calibration capability
-
The Short Path Distillation Head Bertha 100, since development in 2018, has become one of the leading standards in distillation head types in the industry. 2023 has brought the Bertha 100 to its final perfect form with 6 generations of evolution. This head comes equipped with 45/50 thermoport, 34/45 discharge port and a 100mm bore that secures to a boiling flask with o-ring and clamp. The Short Path Distillation Head Bertha 100 (previously SPD-4 MPD Big Bertha) is an extremely high vapor fractionation column head. The first section starts in the flask to retain as much heat in the column as possible. This entire column and entry into flask is isolated from the outside air and the flange fittings. The first chamber is a rough fractionation chamber with a lower rejection section that prevents any condensate from moving upwards. The center section is a secondary refinement section and will further refine the vapors. The upper third section is our patented fraction collector. The first dual stage fractionation column to ever be invented or used in distillation glassware, pilot or small scale. Can achieve 2-4 liters per hour (6 liters per hour with upgraded chilling and vacuum accessories) first pass and ready for crystallization. Vigs are not needed for this technology due to the industry first "no-vig" approach which utilizes a baffled section that extends down below the head base and into the boiling flask. Requirement to use these heads would be a sogevac + dual e2m30 -or- sogevac + e80 -or- sogevac + e80 + diffusion array. This particular setup benefits from a custom diffusion array and an Apollo Vacuum Controller with the inert gas sweeping feature. Effectively increasing the stock speed and lowering the temperatures further. Included: Our flanged heads fit exclusively to Summit MPD boiling flasks: Refer to our instructional (SPD-4 MPD Complete) for correct setup of this head. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Short Path Distillation Head Bertha 100 -
HB series heads are inspired by our patented fraction collector technology paired with a larger flanged bore. Short Path Distillation Head HB1 100 comes equipped with 34/45 discharge port and a 100mm bore that secures to a boiling flask with o-ring and clamp. The Short Path Distillation Head HB1 100, or previously SPD-4 MPD (modified path distillation), was created for one of our testers Breaking Dabs aka Heisenberg. With his unique skills he has helped us tune the HB series heads to evolve and provide solutions for our users. HB1 is designed to be ultra selective to evacuate all previous fractions before the main body without letting the main body through. With some temp, main body can come out extremely fast and this head can be used as a first pass head. It is very effective in removing heads fractions while retaining main body components. Vigs are not needed for this technology due to the industry first "no-vig" approach which utilizes a baffled section that extends down below the head base and into the boiling flask. Please contact us for a completely tuned system with this hardware! Requirement to use these heads would be a sogevac + dual e2m30 -OR- sogevac + e80 -OR- sogevac + e80 + diffusion array. This particular setup benefits from a custom diffusion array and an Apollo Vacuum Controller with the inert gas sweeping feature. Effectively increasing the stock speed and lowering the temperatures further. The HB1 100mm head comes with: Our flanged heads fit exclusively to Summit boiling flasks: As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Boiling flask not included. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Short Path Distillation Head HB1 100 Please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. -
The Diamond Miner is a direct replacement to the mason jar or the steel and glass pressure chambers on the market. Completely jacketed so you can use a chiller such as the AD40-7L to control the temperature inside the chamber and set different ramp points to optimize diamond growth. Rated up to 30PSI so it can be used with many different solvents. This vessel is chemical resistant on all valves and seals. Included with (4) GL14 , (2) valve plungers, 100mm flange clamp and o-ring. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Pressure Vessel. Crystallization Diamond Miner -
$7,373.00
The Polyscience IP-80 Immersion Chiller has a custom condenser probe unit for cold traps. Continuous cooling to temperatures as low as -80°C. Key Features:- Working Temperature Range C: -40°C to -80°C
- Designed to run at maximum cooling
- An economical alternative to dry ice or liquid nitrogen
- Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids
- Overall Dimensions (L x W x H) 20.1 x 15 x 22.3 in
- Refrigerant R404A & R508B
-
Separatory Funnel 1 Liter comes equipped with PTFE flow control valve (stopcock) and GL14 discharge. 24mm (24/40) standard taper joint. Many different uses from terpene extraction to water washes. High temp PTFE GL14 included. Find corresponding parts in our Terpene Glassware section. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve. Stands, clamps & supports not included. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Separatory Funnel 1 Liter