-
The KF16 to Male 24/40 PTFE Adapter is typically used to convert a glass system to a vacuum system or sensor. Adapter has 11mm bore. Secure your male connection with a keck clip. PTFE billet parts made right here in the USA. Be sure to have KF16x10 Centering Ring and KF16 clamp to make your KF16 connection.
-
The Swagelok DV-2 is a ball and needle 3/8 dual pump valve kit. A high vacuum, 2 piece valve setup, rated for up to 8/9 scale. This item itself is a major tool in controlling vacuum or bleeding atmosphere into pump without risking any leak point. Swagelok is leading the industry in these types of valves. See for yourself: swagelok/valves
-
The 29 SPD Discharge Adapter fits directly onto any glass 29/42 male or into a 29/42 KF25 adapter. Threads are 1/4 BSPP. Single adapter only. 100% Billet stainless steel and 100% USA made.
-
The Apollo Vacuum Controller is an advanced scientific laboratory vacuum controller, display, digital readout, and vacuum live reading analysis device.
(Pictured here shows location of the display and first 536 sensor {above}. Second picture shows location of second 536 sensor off the vacuum pump line {below})
This controller not only shows real time data for your laboratory process, it can also be used as a live pump down curve testing device for vacuum pumps in your lab. From seeing guaranteed accurate readings in your short path system to identifying the health of your pump, the Apollo is the most advanced tool in your arsenal when it comes to vacuum control with accuracy and quality second to none. All Summit hardware is now compatible with the new free ATHENA software. Here is a Youtube to help install. Do you have a rotary evaporator or falling film that needs full vacuum control? Take a look at the Proportional Vacuum Controller. Standard options:
- The first two pre-installed board locations have two 536 cleanable sensors (KF25), factory calibrated to a NIST certified test bench on each device prior to shipping. Usually one sensor is attached to the laminar portion of a short path to tell you what is going on in the system, and the second is attached to the pump to tell you the health and performance of the pump array in use.
- A third board location is pre-installed and pre-calibrated for the use of a UHVP sensor (ultra high vacuum pressure) which is an option to be added-on if the user wants to use a third pump bay accessory like a diffusion pump or turbo pump etc. without any further needed upgrades to the Apollo itself.
- A fourth board location is pre-installed for phantom power. There are two phantom power ports used to control the optional added-on feature on external control valves. Each are independently controlled by the Apollo core software built in. With no needed upgrades to the Apollo itself.
- A fifth board location is pre-installed with sweep valve controlling hardware.
Upgrades are:
- Inert gas sweep valve kit and pressure regulator for turbo charging system speeds in various processes.
- Up to two phantom powered Edwards bellow valves for vacuum valve control of wet or dry vacuum operation.
- UHVP Sensor for additional diffusion or turbo control.
-
$12,000.00 $9,990.00
Second to none in temperature uniformity, temperature stability and drying speed (purging). The combination of these high marks results in throughput (yield & productivity). This unit reaches 100°F in just 15 minutes thanks to the individual direct shelf heating. Each shelf has its own temperature controller for varying temperatures. KF25 full bore into the oven all the way to the chamber. No size reductions like in other ovens. These ovens are the real deal. CE & UL CERTIFIED! 9cu ft Vacuum oven specificationsElectric 110V 50/60Hz 1PH 13.6A, 1500W Chamber Size: 15.75 x 15 x 23" deep Material: Stainless Steel Capacity: 9 cubic feet Temperature control Controller: microcomputer with LCD display Range: ambient to 302°F Display units: Fahrenheit or Celsius Accuracy: +/- 0.1°F Uniformity: +/- 0.5 at 100°F5 Controllers (individual direct shelf heating)Warm-up time to 100°F: 15 minutes (without load) Vacuum Range: 0 to 76 cmHg (0 to 0.1MPa) Vacuum port: KF25 flange x1, KF25 strait pipe with elbow x1, KF25 clamps and o-rings x2 (ALL INCLUDED)Vent port: 3/8" female threaded Weight Unit: 555 Lbs, shipping: 747 Lbs Dimensions (WxDxH) Unit: 38 x 37 x 32" Shipping: 45 x 45 x 44" Shelves 5 fixed and individually heated shelves, 23x27" each Distance between shelves: 4"Area: 23x27" , 345 sq inches Door gasket material Food grade silicone Observation window 3/4" tempered glass Safety Built in circuit breaker, over-temp protector In-door lights LED CE & UL compliance Yes To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
-
Adapter fits any KF25 flange with KF25 o-ring and KF25 clamp. Threads are 0.25 inch BSPP. Commonly used for wipers (wiped film or rolling film) using Summit Discharge Pumps. Single adapter only. 100% Billet stainless steel and 100% USA made.
-
This is a high precision inert gas regulation valve assembled at Micro Matic & calibrated at DigiVac.
- Forged brass and die cast for durability
- O-Ring inlet seal at tank connection
- Set screw pressure adjustment
- Flow control inlet
- Calibrated exclusively to the Summit sweep valve & vacuum controller
-
Billet stainless steel adapter that reduces the diameter of your KF vacuum pipe. KF40 to KF25 flange. Summit has corresponding KF25 and KF40 products in our Stainless Steel section.
-
KF25 stainless steel 90 degree elbow for high vacuum applications. Don't forget your clamps! Summit has other KF25 products in our Stainless Steel section.
-
Sale!The KF25 cross is a staple in most larger vacuum systems that require that extra flange for vacuum gages or other high vacuum devices. Built to last with 304 stainless steel and superior TIG welding. All KF flanges connect with o-ring and clamp (links below). Cross is 4 inch end to end.
-
The SVC-1 Summit Vacuum Control is used for chemical duty solvent recovery or vacuum control. Either for rotary evaporators, filtration or recovering highly volatile solvents. This unit was designed and produced on the market to establish a new standard, with new circuit boards, PTFE valves and the LEAST amount of parts compared to any competitor units - the SVC-1 makes a new standard in high flow vacuum regulation and control. The vacuum regulator is particularly useful when you are looking to maintain pressure at a certain level as needed for botanical processing and rotary evaporation. Mounting can be bench-top or on a laboratory pole.
- Display of both the set-point and current vacuum control
- Fine control of target vapor pressure for more precise compound separation through distillation
- Flow path designed to be tolerant of harsh chemicals
- CE and RoHS Certified
- Fine Grained Vacuum Control
- Simultaneous display of both current vacuum and set point
- Direct, easy set point setting
- Remote control via USB
- Keeps your pump oil away from your process
- Enables using reliable and long lasting rotary vane oil pumps in applications where diaphragm pumps were previously required
- Keeps vacuum pumps near their base pressure resulting in longevity, fewer oil changes and less oil mist
Design Features
- Simple to use Interface
- Flow path designed to be tolerant of harsh chemicals
- Use of larger orifice parts results in much faster pump-downs
-
The KF25 Adapter 29/42 is typically used to convert a glass system to a vacuum system or sensor. Hook up to a bellow, Straight Pipe, KF25 sensor or any KF25 flange. Secure your glass to steel connection with a keck clip. Stainless billet parts made right here in the USA.
-
The KF25 Adapter 24/40 is typically used to convert a glass system to a vacuum system or sensor. Hook up to a bellow, Straight Pipe, KF25 sensor or any KF25 flange. Secure your glass to steel connection with a keck clip. Stainless billet parts made right here in the USA.
-
The KF25 Adapter 34/45 is typically used to convert a glass system to a vacuum system or sensor. Hook up to a bellow, Straight Pipe, KF25 sensor or any KF25 flange. Secure your glass to steel connection with a keck clip. Stainless billet parts made right here in the USA.
-
The Edwards Speedivalve (sp25k) is a diaphragm sealed in-line, isolation valve. The construction consists essentially of a flexible elastomeric diaphragm which is sealed onto a lightly polished seat by a screw thread mechanism. The valve terminates in NW flanges and can be pipeline supported or panel mounted. Fits on all your KF25 flanges. Summit recommends these KF25 parts for this item:Easy to operate with visual indication of valve open (SP10K to SP25K). Leak tight to better than 10-6 mbar ls-1 / 8 x 10-7 Torr ls-1. Diaphragm completely isolates mechanism from vacuum system. Will withstand 9 bar overpressure (SP10K to SP40K, with Co-Seal)
-
100g Long term lubrication for high temperature applications under the influence of aggressive media up to 250C. Klübertemp GR RT greases are white, homogeneous long-term greases based on perfluorinated polyether oils (PFPE) and polytetrafluoroethylene (PTFE). This series contains greases with a range of specific additives for use in different applications. Klübertemp GR RT 15 shows good compatibility with plastics and elastomers, enabling a wide range of component materials to be selected. Vapor pressure of 2.0 x 10⁸ Torr at 20°C Vapor pressure of 4.7 x 10⁶ Torr at 100°C
-
$248.00
I 19 Standard Vacuum Pump Fluid. 5 Gallons (18.927 Liters) Hydrocarbon fluid for mechanical vacuum pumps used in non-corrosive applications. This premium grade oil produces lower vapor pressures, reduced backstreaming, and has longer fluid life. sds To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing. -
25g Apiezon H Grease is a silicone-free high vacuum grease perfectly suited for use at high temperatures in both scientific and industrial applications. Thanks to its 'stiction' power Apiezon H Grease is ideal for use with laboratory glassware. Its high thermal conductivity makes it the perfect vacuum grease in situations where heat sink media requires adhesion. Exhibits a vapour pressure of 1.7 x 10-9 Torr at 20°C and upper operating temp of 240°C
Why Use Apiezon H Grease?
- performs well under a wide range of temperatures, from -10 to +240°C, and retains its optimum consistency at temperatures between +10 and +110°C
- rather than melting, actually becomes stiffer as temperature increases and therefore is not recommended for highly stressed bearings
- has excellent heat transfer properties
- conducts heat away from the site of operation, reducing the danger of overheating and damaging heat-sensitive components
- exhibits good 'stiction' or sticking power
- has powerful 'gettering' action, meaning it absorbs potentially harmful grease and chemical impurities on metal and glass surfaces
- is easy to clean and remove as it is soluble in hydrocarbon solvents
-
Ultra high vacuum grease. 100g Apiezon 501 is a chemically inert, high temperature and extreme pressure lubricant. With an upper operating temperature of 250°C and vapour pressure of 1.3 x 10-12 at 25°C, it is robust, versatile and can be used for sealing and lubricating under the most extreme operating conditions. This includes environments where aggressive chemicals and strong oxidizing agents are regularly used. sds
Why Use Apiezon 501 Grease?
- PFPE based
- High temperature lubricant
- Used in oxygen rich environments
- Ultra high vacuum
- Chemically inert
- Extreme pressure
- Wide temperature range
Benefits:
- Extended equipment life
- High temperature lubricant
- Reduced equipment downtime
- Lower service costs
- Life-time lubrication
- Guaranteed Apiezon quality
- Expert technical support