-
KF16 O Ring will fit between any KF16 flange while using a KF16 clamp. Made from Viton and stainless steel. -
The KF16 to Male 24/40 PTFE Adapter is typically used to convert a glass system to a vacuum system or sensor. Adapter has 11mm bore. Secure your male connection with a keck clip. PTFE billet parts made right here in the USA. Be sure to have KF16x10 Centering Ring and KF16 clamp to make your KF16 connection. -
KF16x10 Centering Ring. Viton rubber and stainless steel. Used with breather valves and barbs. Comes in the KF Breather Valve Kit. 100% USA made. -
KF16x25 Reducer. Stainless steel adapter that reduces the size of your vacuum pipe diameter. Summit has other KF25 products in our Stainless Steel section. -
Adapter fits any KF25 flange with KF25 o-ring and KF25 clamp. Threads are 0.25 inch BSPP. Commonly used for wipers (wiped film or rolling film) using Summit Discharge Pumps. Single adapter only. 100% Billet stainless steel and 100% USA made. -
KF25 stainless steel 90 degree elbow for high vacuum applications. Don't forget your clamps! Summit has other KF25 products in our Stainless Steel section. -
The KF25 Adapter 24/40 is typically used to convert a glass system to a vacuum system or sensor. Hook up to a bellow, Straight Pipe, KF25 sensor or any KF25 flange. Secure your glass to steel connection with a keck clip. Stainless billet parts made right here in the USA. -
The KF25 Adapter 29/42 is typically used to convert a glass system to a vacuum system or sensor. Hook up to a bellow, Straight Pipe, KF25 sensor or any KF25 flange. Secure your glass to steel connection with a keck clip. Stainless billet parts made right here in the USA. -
The KF25 Adapter 34/45 is typically used to convert a glass system to a vacuum system or sensor. Hook up to a bellow, Straight Pipe, KF25 sensor or any KF25 flange. Secure your glass to steel connection with a keck clip. Stainless billet parts made right here in the USA. -
KF25 to 3/8 Barb Adapter needs a KF25 O-Ring and clamp. Stainless steel barb used for vacuum hose transitions. Summit has other KF25 items in our Vacuum Parts section. Summit recommends these items for this product: -
The KF25 Bellow is a corrugated stainless steel pipe that connects to corresponding kf25 flanges. These malleable pipes allow for some error as apposed to hooking up a solid straight pipe. Available in 10, 20 and 40 inch lengths. Don't forget other KF25 fittings and accessories: 100% stainless steel. 100% USA made. Bellow warning: Stretch and bend your bellow into position before installation. Engaging your pump(s) while not doing so could make the bellow jolt/jostle, putting stress on or damage glassware, voiding limited warranties. KF25 Bellow -
The KF25 Clamp combined with KF25 O Ring form a vacuum tight seal between the connection flanges. This circumferential clamp is used for connecting standard NW25 / KF25 vacuum components. Aluminum clamp with butterfly nut for easy tightening. -
Sale!
The KF25 cross is a staple in most larger vacuum systems that require that extra flange for vacuum gages or other high vacuum devices. Built to last with 304 stainless steel and superior TIG welding. All KF flanges connect with o-ring and clamp (links below). Cross is 4 inch end to end. -
1" Male JIC to KF25 adapter (Harvest Right Adapter) fits any KF25 flange. Summit's stainless adapters contain 100% USA made precision billet steel. Why choose an adapter with multiple parts and more chances to leak? -
KF25 O Ring will fit between any KF25 flange while using a KF25 clamp. Made from Viton and stainless steel. -
KF25 Straight Pipe is an 8 inch stainless steel high vacuum pipe. KF25 Flanges. Summit has other KF25 products in our Stainless Steel section. Looking for a specific length?.. we might be able to help! Call us -
The KF25 Tee is cut from 100% billet stainless steel. At Summit, quality is everything. Don't accept the imitations. 100% USA made. -
Billet stainless steel adapter that reduces the diameter of your KF vacuum pipe. KF40 to KF25 flange. Summit has corresponding KF25 and KF40 products in our Stainless Steel section. -
The KF40 Bellow is a corrugated stainless steel pipe that connects to corresponding kf40 flanges. These malleable pipes allow for some error as apposed to hooking up a solid straight pipe. Available in 24 and 36 inch lengths. Don't forget other KF40 fittings and accessories: 100% stainless steel. 100% USA made. Bellow warning: Stretch and bend your bellow into position before installation. Engaging your pump(s) while not doing so could make the bellow jolt/jostle, putting stress on or damage glassware, voiding limited warranties. KF40 Bellow -
The KF40 Clamp combined with KF40 O Ring form a vacuum tight seal between the connection flanges. This circumferential clamp is used for connecting standard NW40 / KF40 vacuum components. Aluminum clamp with butterfly nut for easy tightening. -
The KF40 O Ring will fit between any KF40 flange while using a KF40 clamp. Made from Viton and stainless steel. -
Laminar Coil-less 29 is a shorter, more compact short path distillation arm which allows for higher temperatures in the vapor bypass. A true laminar with less turbulence. Comes with #24 glass stopper and choice of #24/40 KF25 adapter. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Laminar Coil-less 29 -
Laminar Coil-less 34 is a shorter, more compact short path distillation arm which allows for higher temperatures in the vapor bypass. A true laminar with less turbulence. Comes with #24 glass stopper and choice of #24/40 KF25 adapter. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Laminar Coil-less 34 -
Laminar Coiled No Discharge 29 is a shorter, more compact unit which allows for higher temperatures in the vapor bypass. Coiled laminar with less turbulence and no discharge. Comes with #24 glass stopper and choice of #24/40 KF25 adapter. Moreover, these short path distillation arms are used in conjunction with a Swing Arm Kit. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Laminar Coiled No Discharge 29 -
Laminar Coiled No Discharge 34 is a shorter, more compact unit which allows for higher temperatures in the vapor bypass. Coiled laminar with less turbulence and no discharge. Comes with #24 glass stopper and choice of #24/40 KF25 adapter. Moreover, these short path distillation arms are used in conjunction with a Swing Arm Kit. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Laminar Coiled No Discharge 34 -
Laminar No Discharge 29 is a shorter, more compact unit which allows for higher temperatures in the vapor bypass. Coil-less laminar with less turbulence and no discharge. Comes with #24 glass stopper and choice of #24/40 KF25 adapter. Moreover, these short path distillation arms are used in conjunction with a Swing Arm Kit. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Laminar No Discharge 29 -
Laminar No Discharge 34 is a shorter, more compact unit which allows for higher temperatures in the vapor bypass. Coil-less laminar with less turbulence and no discharge. Comes with #24 glass stopper and choice of #24/40 KF25 adapter. Moreover, these short path distillation arms are used in conjunction with a Swing Arm Kit. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Laminar No Discharge 34 -
Laminar Path Monocow 29 is a traditional short path distillation distribution adapter. Added condenser coil allows you to dial in the temps. 29/42 from the head and 34/45 to the cold trap. 29 to flask and 24 to vacuum port with all tapers traditional. Laminar Path comes with 24/40 Stopper and GL14s, with choice to add a stainless steel #24/40 KF25 adapter. Glassware used for maximum efficiency distillation. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated area with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Laminar Path Monocow 29 -
Laminar Path Monocow 34 is a traditional short path distillation distribution adapter. Added condenser coil allows you to dial in the temps. 34/45 all the way through with 29 to flask and 24 to vacuum port. Laminar Path comes with 24/40 Stopper and GL14s, with choice to add a stainless steel #24/40 KF25 adapter. Glassware used for maximum efficiency distillation. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Laminar Path Monocow 34 -
Liquid Temp Control Key 34/45 is a short path distillation head key that is used to generate a localized cold/hot surface. The temperature achieved reduces or enlarges the quantity of volatile material exhausted into the air. This premium Schott glass 34mm plug is 8.5 inch overall length and 4.5 inch from the bottom of the frosted taper with the tip being a small condenser coil. High Temp GL14s included. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Liquid Temp Control Key 34/45 -
Liquid Temp Control Key 45/50 is a short path distillation head key that is used to generate a localized cold/hot surface. The temperature achieved reduces or enlarges the quantity of volatile material exhausted into the air. This premium Schott glass 45mm plug is 14.25 inch overall length and 10.5 inch from the bottom of the frosted taper with 4 large bands. High Temp GL14s included. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Liquid Temp Control Key 45/50 -
$8,800.00
Polyscience 1.5hp Heavy Duty Chiller LO/BP has a LOW OUTPUT/BACK PRESSURE return system. Exclusive to Summit, this 1.5hp offers more efficiency than the standard unit and comes in 100% stainless enclosure build out for a sexy look - 10l high temperature to 20l medium temperature rating for rotovaps. 220v- Small footprint conserves floor space
- Displays temperature and pressure or flow rate simultaneously
- User-adjustable temperature, pressure, and flow rate alarms
- Simple operation and maintenance
-
$21,995.00
Polyscience Heavy Duty 10HP 3 Phase Chiller will handle different tasks - dual 50L roto rating. When precision liquid cooling matters, go with Polyscience cooling solutions.To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.- DuraChill® Chillers 2HP and up are not available outside of the United States
- High capacity cooling for reactors
- Displays temperature and pressure or flow rate simultaneously
- User-adjustable temperature, pressure, and flow rate alarms
- Simple operation and maintenance
- Wide variety of options available
-
$5,450.00
6100 PolyScience Series 1 HP Chiller, Turbine Pump; 100 psi; 13.2 l/min, 1HP, 240V, 50Hz. Cooling Capacity at 20 deg C: 2750 WTo purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.Features
- Large, dual displays present temperature and pressure or flow rate simultaneously
- Compact, portable design takes up less floor space
- Cooling at ambient temperatures as high as 35°C
- Magnetic drive centrifugal pump
- Choice of compressor sizes
- User-adjustable temperature, pressure, and flow rate alarms
- External temperature tracking and communications capability (optional)
- Cool Command™, WhisperCool® (3/4 and 1 HP models)
-
$6978.75
6700 Polyscience series Heavy Duty 3/4 HP Chiller, Turbine Pump; 208-230V, 60Hz. Cooling Capacity at 20 deg C: 2300 W; Max Flow 3.5 gpm (13.2 l/min); Max Pressure 100 psi (6.9 bar)To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.Features
- Large, dual displays present temperature and pressure or flow rate simultaneously
- Compact, portable design takes up less floor space
- Cooling at ambient temperatures as high as 35°C
- Positive displacement pump
- Choice of compressor sizes
- User-adjustable temperature, pressure, and flow rate alarms
- External temperature tracking and communications capability (optional)
- Cool Command™, WhisperCool® (3/4 and 1 HP models)
-
$14,285.00
Polyscience 3HP Heavy Duty Durachill will handle numerous tasks. Air cooled with simple operation and maintenance. When precision liquid cooling matters, go with Polyscience cooling solutions.To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.- DuraChill® Chillers 2HP and up are not available outside of the United States
- High capacity cooling for plasma torch cutting, machine tool hydraulics, high powered lasers, and other high heat generating processes and equipment
- Displays temperature and pressure or flow rate simultaneously
- User-adjustable temperature, pressure, and flow rate alarms
- Simple operation and maintenance
- Wide variety of options available
-
$21,995.00
Polyscience 5HP Heavy Duty 3 Phase Chiller will handle different tasks - 50L roto rating. When precision liquid cooling matters, go with Polyscience cooling solutions.To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.- DuraChill® Chillers 2HP and up are not available outside of the United States
- High capacity cooling for plasma torch cutting, machine tool hydraulics, high powered lasers, and other high heat generating processes and equipment
- Displays temperature and pressure or flow rate simultaneously
- User-adjustable temperature, pressure, and flow rate alarms
- Simple operation and maintenance
- Wide variety of options available
-
$17,995.00
Polyscience 8HP Heavy Duty Air Cooled 3 Phase Chiller will handle different tasks - 50L roto rating. When precision liquid cooling matters, go with Polyscience cooling solutions.To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.- DuraChill® Chillers 2HP and up are not available outside of the United States
- High capacity cooling for plasma torch cutting, machine tool hydraulics, high powered lasers, and other high heat generating processes and equipment
- Displays temperature and pressure or flow rate simultaneously
- User-adjustable temperature, pressure, and flow rate alarms
- Simple operation and maintenance
- Wide variety of options available
-
$7,047.25
Polyscience AD 15 Liter chiller/heater are powerful, low to high temperature units that are matched for use with rotary evaporators, vacuum systems, spectrometers, and other analytical equipment. They also are available with a mobile feature for convenient placement under a bench. KEY SPECS:
Overall Depth: 22.4 in H: 26.9 in W: 14.5 in To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.Controller Type Advanced DigitalDisplay 3.75" Touch-Pad LCDConnectivity Ethernet, USB A & B, RS232/addressable RS485, External Temperature ProbeLanguages Supported 4: French, German, Spanish, EnglishSwivel 180 Rotating Controller YesWorking Temperature Range °C -40°c to 200°cTemperature Stability °C ±0.01°Fluid Optimization/Specific Heat Tuning Automatic and/or user-adjustableTemperature Calibration Capability 1-pointWorking Access (L x W x D) (cm) 8.35 x 10.88 x 5.5 inPump Type Pressure/SuctionExternal Temperature Control Capability YesFlammability Class (DIN 12876-1) III (FL) -
$6,292.25
Polyscience AD 7 liter chiller/heater has an advanced digital 7L space saving refrigerated circulator, -40 to 200 deg C, 360W Cooling power @ 20 deg C, 1100W Heater, 4.3 psi (0.30 bar), 5.3 gpm (20.1 LPM), 120V, 60Hz. Polyscience chillers/heaters are powerful, low to high temperature units that are matched for use with rotary evaporators, vacuum systems, spectrometers, and other analytical equipment. They also are available with a mobile feature for convenient placement under a bench.- Intuitive 3.75” (9.5 cm) display with touch pad control
- Swivel 180™ rotating controller
- On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, and external temperature probe
- On-screen prompts
- Automatic performance optimization and specific heat tuning
- Single-point calibration capability
-
$3,000.00
Polyscience AD 7 Liter Heater. Laboratory liquid heating at your fingertips.Description Temperature range of 10°C to 200°C , 7 Liter Heating Circulator Controller Type Advanced DigitalDisplay 3.75" Touch-Pad LCDConnectivity Ethernet, USB A & B, RS232/addressable RS485, External Temperature Probe- Intuitive 3.75” (9.5 cm) display with touch pad control
- Swivel 180™ rotating controller
- On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, and external temperature probe
- On-screen prompts
- Automatic performance optimization and specific heat tuning
- Single-point calibration capability
-
$7,373.00
The Polyscience IP-80 Immersion Chiller has a custom condenser probe unit for cold traps. Continuous cooling to temperatures as low as -80°C. Key Features:- Working Temperature Range C: -40°C to -80°C
- Designed to run at maximum cooling
- An economical alternative to dry ice or liquid nitrogen
- Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids
- Overall Dimensions (L x W x H) 20.1 x 15 x 22.3 in
- Refrigerant R404A & R508B
-
Sale!
(1) PTFE Triangle Bar 14x25 mm. Magnetic triangular prism stir bar for boiling flasks. Triangular PTFE also available in: -
Raschig Rings 6x6 are small pieces of borosilicate tube used in large numbers as a packed bed within columns for distillation. These glass rings provide a large surface area within the volume of the column for interaction between liquid and gas vapors. Rings actually measure 6x8mm in size. 1 Pound bag. Also available: Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Raschig Rings 6x6 -
Raschig Rings 8x8 are small pieces of borosilicate tube used in large numbers as a packed bed within columns for distillation. These glass rings provide a large surface area within the volume of the column for interaction between liquid and gas vapors. Rings actually measure 8x10mm in size. 1 Pound bag. Also available: Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Raschig Rings 8x8 -
Reflux condensers are used in “conversion” processes to cool the vapor molecules emitted from heated oils to change their gaseous state back into liquid by means of a chilled dual coil. This unit is recommended for 12L and smaller boiling flasks. How it works: The condenser is attached to the boiling flask joint and is secured in a vertical position. Chiller fluid is circulated through the coil to cause the vapors to condense as they rise up through the condenser coils thus preventing them from escaping. This gives you the option to reflux different fluids in your boiling flask for extended periods of time before you run the SPD, this is a must have in the lab for conversions. Flask entry port is 55/50 with 24/40 exit port. Total dimensions 25.75 x 2.25 inch. High Temp GLs included. 24/40 to GL14 Adapter OR 24/40 to GL18 Adapter included. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve. NEED A 34/45 PORT? Call us, you can custom order anything! Base not included Summit recommends all users to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Reflux Condenser Dual Coil -
Reflux condensers are used in “conversion” processes to cool the vapor molecules emitted from heated oils to change their gaseous state back into liquid by means of a chilled triple coil. This unit is recommended for 22L and larger boiling flasks. How it works: The condenser is attached to the boiling flask joint and is secured in a vertical position. Chiller fluid is circulated through the coil to cause the vapors to condense as they rise up through the condenser coils thus preventing them from escaping. This gives you the option to reflux different fluids in your boiling flask for extended periods of time before you run the SPD, this is a must have in the lab for conversions. Flask entry port is 55/50 with 24/40 exit port. High Temp GLs included. 24/40 to GL14 Adapter OR 24/40 to GL18 Adapter included. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve. NEED A 45/50 PORT? Call us, you can custom order anything! Base not included Summit recommends all users to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Reflux Condenser Triple Coil -
Out of stock
Out of stock. Try the similar/upgraded Filter Bottle Top 45 with elongated port. Separatory Funnel Cap 45, with improved recessed port for increased velocity when self mixing. Comes included with glass cap, rodaviss and (2) GL14 adapters. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Separatory Funnel Cap 45 -
The Short Path Distillation Head Bertha 100, since development in 2018, has become one of the leading standards in distillation head types in the industry. 2023 has brought the Bertha 100 to its final perfect form with 6 generations of evolution. This head comes equipped with 45/50 thermoport, 34/45 discharge port and a 100mm bore that secures to a boiling flask with o-ring and clamp. The Short Path Distillation Head Bertha 100 (previously SPD-4 MPD Big Bertha) is an extremely high vapor fractionation column head. The first section starts in the flask to retain as much heat in the column as possible. This entire column and entry into flask is isolated from the outside air and the flange fittings. The first chamber is a rough fractionation chamber with a lower rejection section that prevents any condensate from moving upwards. The center section is a secondary refinement section and will further refine the vapors. The upper third section is our patented fraction collector. The first dual stage fractionation column to ever be invented or used in distillation glassware, pilot or small scale. Can achieve 2-4 liters per hour (6 liters per hour with upgraded chilling and vacuum accessories) first pass and ready for crystallization. Vigs are not needed for this technology due to the industry first "no-vig" approach which utilizes a baffled section that extends down below the head base and into the boiling flask. Requirement to use these heads would be a sogevac + dual e2m30 -or- sogevac + e80 -or- sogevac + e80 + diffusion array. This particular setup benefits from a custom diffusion array and an Apollo Vacuum Controller with the inert gas sweeping feature. Effectively increasing the stock speed and lowering the temperatures further. Included: Our flanged heads fit exclusively to Summit MPD boiling flasks: Refer to our instructional (SPD-4 MPD Complete) for correct setup of this head. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Short Path Distillation Head Bertha 100 -
The Short Path Distillation Head Bertha 150, since development in 2018, has become one of the leading standards in distillation head types in the industry. 2023 has brought the Bertha 100 to its final perfect form with 6 generations of evolution. This head comes equipped with 45/50 thermoport, 34/45 discharge port and a 100mm bore that secures to a boiling flask with o-ring and clamp. The Short Path Distillation Head Bertha 150 (previously SPD-4 MPD Big Bertha) is an extremely high vapor fractionation column head. The first section starts in the flask to retain as much heat in the column as possible. This entire column and entry into flask is isolated from the outside air and the flange fittings. The first chamber is a rough fractionation chamber with a lower rejection section that prevents any condensate from moving upwards. The center section is a secondary refinement section and will further refine the vapors. The upper third section is our patented fraction collector. The first dual stage fractionation column to ever be invented or used in distillation glassware, pilot or small scale. Can achieve 4-6 liters per hour (8 liters per hour with upgraded chilling and vacuum accessories) first pass and ready for crystallization. Vigs are not needed for this technology due to the industry first "no-vig" approach which utilizes a baffled section that extends down below the head base and into the boiling flask. Requirement to use these heads would be a sogevac + dual e2m30 -or- sogevac + e80 -or- sogevac + e80 + diffusion array. This particular setup benefits from a custom diffusion array and an Apollo Vacuum Controller with the inert gas sweeping feature. Effectively increasing the stock speed and lowering the temperatures further. Included: Our MPD heads fit exclusively to Summit MPD boiling flasks: As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Short Path Distillation Head Bertha 150 -
Sale!
The Short Path Distillation Head FC34 (spd-2 fc34) has been upgraded with our new fraction collector technology. This head runs specifically for smaller setups (2L & 5L). Equipped with #34 bore, #29 discharge arm and #24 key port. All tapers are traditional. When Summit Research initially released the first fraction collector technology we knew it would be a hit. We have innovated the newest distillation technology with the industry leading high-efficiency heads. We have retrofitted all Summit Research heads to incorporate our patented distillation technology. The fraction collector head offers extremely high-efficiency operational parameters unparalleled to anything available on the market. Summit delivers solutions and results to our customers coming from extensive research and design in the field of high speed, high potency, low temperature, consistent distillations day after day. The differences between the FC series heads are the heights. Lower height heads will have less selectivity with faster speeds and lower temps, taller heads will have slower speeds with slightly higher temps with more selectivity. Partnered with our patented laminar path technology and the inverted cup cold trap/hardpipe kits, our customers experience smooth, fast and consistent clarity time after time. This FC34 head holds a medium height and 2 levels of vigreux for medium rejection. A traditional all around head that will stand the test of time. Refer to our instructional (SPD-2 FC34 Complete) for correct setup of this head. GL14s and key included. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Short Path Distillation Head FC34 -
Sale!
The Short Path Distillation Head FC45 Nano (Previously SPD-6 FC45 Nano) model includes 45/50 main bore with a 29/42 discharge and 24/40 thermoport. This Nano version has no vigreux bringing rejection to a minimum. But that can all change with the right head key. (This key is specially made for the Nano to maximize rejection) and is NOW included along with: When Summit Research initially released the first fraction collector technology we knew it would be a hit. We have innovated the newest distillation technology with the industry leading high-efficiency heads. We have retrofitted all Summit Research heads to incorporate our patented distillation technology. These heads rival wiped film speeds at a fraction of the cost, and higher clarity/purity/speed. The fraction collector head offers extremely high-efficiency operational parameters unparalleled to anything available on the market. Summit delivers solutions and results to our customers coming from extensive research and design in the field of high speed, high potency, low temperature, consistent distillations day after day. The differences between the FC series heads are their heights. Lower height heads will have less selectivity with faster speeds and lower temps, taller heads will have slightly slower speeds with slightly higher temps with more selectivity. Partnered with our patented laminar path technology and the inverted cup cold trap/hardpipe kits, our customers experience smooth, fast and consistent clarity time after time. We innovate where others imitate. 100% made in USA with premium Schott glass. Refer to our instructional (SPD-6 FC45 Complete) for correct setup of this head. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Short Path Distillation Head FC45 Nano -
Sale!
The Short Path Distillation Head FC45 Shorty (Previously SPD-6 FC45 Shorty) model includes 45/50 main bore with a 29/42 discharge and 24/40 thermoport. This Shorty version comes equipped with vigreux, adding an element of rejection. When Summit Research initially released the first fraction collector technology we knew it would be a hit. We have innovated the newest distillation technology with the industry leading high-efficiency heads. We have retrofitted all Summit Research heads to incorporate our patented distillation technology. These heads rival wiped film speeds at a fraction of the cost, and higher clarity/purity/speed. The fraction collector head offers extremely high-efficiency operational parameters unparalleled to anything available on the market. Summit delivers solutions and results to our customers coming from extensive research and design in the field of high speed, high potency, low temperature, consistent distillations day after day. The differences between the FC series heads are their heights. Lower height heads will have less selectivity with faster speeds and lower temps, taller heads will have slightly slower speeds with slightly higher temps with more selectivity. Partnered with our patented laminar path technology and the inverted cup cold trap/hardpipe kits, our customers experience smooth, fast and consistent clarity time after time. We innovate where others imitate. 100% made in USA with premium Schott glass. See the SPD6 in action: Instagram Demo
As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process.
GL14s, key and well stopper included.
Refer to our instructional (SPD-6 FC45 Complete) for correct setup of this head.
Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Short Path Distillation Head FC45 Shorty -
Sale!
The Short Path Distillation Head FC45 Tall (Previously SPD-6 FC45 Tall) model includes 45/50 main bore with a 29/42 discharge and 24/40 thermoport. This is the tallest of our FC45 models for more selectivity and reduced speeds. It has multiple rows of vigreux adding more rejection. When Summit Research initially released the first fraction collector technology we knew it would be a hit. We have innovated the newest distillation technology with the industry leading high-efficiency heads. We have retrofitted all Summit Research heads to incorporate our patented distillation technology. These heads rival wiped film speeds at a fraction of the cost, and higher clarity/purity/speed. The fraction collector head offers extremely high-efficiency operational parameters unparalleled to anything available on the market. Summit delivers solutions and results to our customers coming from extensive research and design in the field of high speed, high potency, low temperature, consistent distillations day after day. The differences between the FC series heads are their heights. Lower height heads will have less selectivity with faster speeds and lower temps, taller heads will have slightly slower speeds with slightly higher temps with more selectivity. Partnered with our patented laminar path technology and the inverted cup cold trap/hardpipe kits, our customers experience smooth, fast and consistent clarity time after time. We innovate where others imitate. 100% made in USA with premium Schott glass. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. GL14s, key and well stopper included. Refer to our instructional (SPD-6 FC45 Complete) for correct setup of this head. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Short Path Distillation Head FC45 Tall -
The Short Path Distillation Head FC55 Nano (Previously SPD-6 FC55 Nano) model includes 55/50 main bore with a 34/45 discharge and 34/45 thermoport. This Nano version has no vigreux bringing rejection to a minimum. But that can all change with the right head key. (This key is specially made for the Nano to maximize rejection) and is NOW included along with: When Summit Research initially released the first fraction collector technology we knew it would be a hit. We have innovated the newest distillation technology with the industry leading high-efficiency heads. We have retrofitted all Summit Research heads to incorporate our patented distillation technology. These heads rival wiped film speeds at a fraction of the cost, and higher clarity/purity/speed. The fraction collector head offers extremely high-efficiency operational parameters unparalleled to anything available on the market. Summit delivers solutions and results to our customers coming from extensive research and design in the field of high speed, high potency, low temperature, consistent distillations day after day. The differences between the FC series heads are the heights. Lower height heads will have less selectivity with faster speeds and lower temps, taller heads will have slightly slower speeds with slightly higher temps with more selectivity. Partnered with our patented laminar path technology and the inverted cup cold trap/hardpipe kits, our customers experience smooth, fast and consistent clarity time after time. We innovate where others imitate. 100% made in USA with Schott glass. There are two recommended options with varying pumps, diffusion and total liters:- SPD-6 FC55 Optional Diffusion Mixed setup using 5/12/22 liter boiling flasks.
- SPD-6 FC55 Complete For a setup utilizing the 22L boiling flask and diffusion.
-
Short Path Distillation Head FC55 Shorty models include 55/50 main bore with a 34/45 discharge and thermoport. This Shorty version comes equipped with vigreux, adding an element of rejection. See the SPD6 in action: Instagram Demo
When Summit Research initially released the first fraction collector technology we knew it would be a hit. We have innovated the newest distillation technology with the industry leading high-efficiency heads. We have retrofitted all Summit Research heads to incorporate our patented distillation technology. These heads rival wiped film speeds at a fraction of the cost, and higher clarity/purity/speed. The fraction collector head offers extremely high-efficiency operational parameters unparalleled to anything available on the market. Summit delivers solutions and results to our customers coming from extensive research and design in the field of high speed, high potency, low temperature, consistent distillations day after day.
The differences between the FC series heads are the heights. Lower height heads will have less selectivity with faster speeds and lower temps, taller heads will have slightly slower speeds with slightly higher temps with more selectivity. Partnered with our patented laminar path technology and the inverted cup cold trap/hardpipe kits, our customers experience smooth, fast and consistent clarity time after time. We innovate where others imitate. 100% made in USA with Schott glass.
GL14s, key and well stopper included.
There are two recommended options with varying pumps, diffusion and total liters:
- SPD-6 FC55 Optional Diffusion Mixed setup using 5/12/22 liter boiling flasks.
- SPD-6 FC55 Complete For a setup utilizing the 22L boiling flask and diffusion.
-
Short Path Distillation Head FC55 Tall models include 55/50 main bore with a 34/45 discharge and thermoport. This is the tallest of our FC55 models for more selectivity and reduced speeds. It has multiple rows of vigreux adding more rejection. When Summit Research initially released the first fraction collector technology we knew it would be a hit. We have innovated the newest distillation technology with the industry leading high-efficiency heads. We have retrofitted all Summit Research heads to incorporate our patented distillation technology. These heads rival wiped film speeds at a fraction of the cost, and higher clarity/purity/speed. The fraction collector head offers extremely high-efficiency operational parameters unparalleled to anything available on the market. Summit delivers solutions and results to our customers coming from extensive research and design in the field of high speed, high potency, low temperature, consistent distillations day after day. The differences between the FC series heads are the heights. Lower height heads will have less selectivity with faster speeds and lower temps, taller heads will have slightly slower speeds with slightly higher temps with more selectivity. Partnered with our patented laminar path technology and the inverted cup cold trap/hardpipe kits, our customers experience smooth, fast and consistent clarity time after time. We innovate where others imitate. 100% made in USA with Schott glass. GL14s, key and well stopper included. There are two recommended options with varying pumps, diffusion and total liters:- SPD-6 FC55 Optional Diffusion Mixed setup using 5/12/22 liter boiling flasks.
- SPD-6 FC55 Complete For a setup utilizing the 22L boiling flask and diffusion.
-
The Short Path Distillation Head FC71 includes a 71/60 main bore with a 34/45 discharge and 34/45 thermoport. The 71 mm can handle bigger systems and a lot of product. A very versatile head that we can cater towards your needs. Comes with 34 key, 34 stopper well and GL14s. This limited edition short path distillation head (along with boiling flask) is 'made to order' and carries longer lead times than most units. Please call us if you need an exact time frame. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Fits exclusively with these boiling flasks: Summit has 5L and 12L options for this head. Please call us for more information. Clamp and stands not included. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Short Path Distillation Head FC71 -
HB series heads are inspired by our patented fraction collector technology paired with a larger flanged bore. Short Path Distillation Head HB1 100 comes equipped with 34/45 discharge port and a 100mm bore that secures to a boiling flask with o-ring and clamp. The Short Path Distillation Head HB1 100, or previously SPD-4 MPD (modified path distillation), was created for one of our testers Breaking Dabs aka Heisenberg. With his unique skills he has helped us tune the HB series heads to evolve and provide solutions for our users. HB1 is designed to be ultra selective to evacuate all previous fractions before the main body without letting the main body through. With some temp, main body can come out extremely fast and this head can be used as a first pass head. It is very effective in removing heads fractions while retaining main body components. Vigs are not needed for this technology due to the industry first "no-vig" approach which utilizes a baffled section that extends down below the head base and into the boiling flask. Please contact us for a completely tuned system with this hardware! Requirement to use these heads would be a sogevac + dual e2m30 -OR- sogevac + e80 -OR- sogevac + e80 + diffusion array. This particular setup benefits from a custom diffusion array and an Apollo Vacuum Controller with the inert gas sweeping feature. Effectively increasing the stock speed and lowering the temperatures further. The HB1 100mm head comes with: Our flanged heads fit exclusively to Summit boiling flasks: As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Boiling flask not included. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Short Path Distillation Head HB1 100 Please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. -
HB series heads are inspired by our patented fraction collector technology paired with a larger flanged bore. Short Path Distillation Head HB1 150 comes equipped with 34/45 discharge port and a 150mm bore that secures to a boiling flask with o-ring and clamp. The Short Path Distillation Head HB1 150, or previously MPD (modified path distillation), was created for one of our testers Breaking Dabs aka Heisenberg. With his unique skills he has helped us tune the HB series heads to evolve and provide solutions for our users. HB1 is designed to be ultra selective to evacuate all previous fractions before the main body without letting the main body through. With some temp, main body can come out extremely fast and this head can be used as a first pass head. It is very effective in removing heads fractions while retaining main body components. Vigs are not needed for this technology due to the industry first "no-vig" approach which utilizes a baffled section that extends down below the head base and into the boiling flask. Please contact us for a completely tuned system with this hardware! Requirement to use these heads would be a sogevac + dual e2m30 -OR- sogevac + e80 -OR- sogevac + e80 + diffusion array. This particular setup benefits from a custom diffusion array and an Apollo Vacuum Controller with the inert gas sweeping feature. Effectively increasing the stock speed and lowering the temperatures further. The HB1 150mm head comes with: Our flanged heads fit exclusively to Summit boiling flasks: As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Short Path Distillation Head HB1 150 Please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified.
