• Apollo Vacuum Controller
    The Apollo Vacuum Controller is a direct and dramatic upgrade to our SVG-3 vacuum gage. This setup is an encompassing 3 zone controller designed to take accurate readings from the:
    1. Distillation area of interest either at the cold trap, or at the reaction area.
    2. Initial vacuum pump readings that will allow the user to see the ultimate vacuum at the pump vs the vacuum at the first location.
    3. UHVP kits can now be added on with the third sensor that reads vacuum at the ultra high vacuum side.
    Items in first picture included only:
    • 1x upgraded touch screen interface
    • 3x circuits loaded, reinstalled, and calibrated (box)
    • 2x standard 4 scale vacuum sensor with kf25
    • The upgrade to the UHVP section requires only one part and is supplied only if pre-ordered with the setup, or purchased later.
    Checkout our Instagram for previews and more information! For the complete setup, sweep valve connects to your calibrated sweep gas regulator. These components give you even more control with the Apollo Vacuum Controller. Complete control at your fingertips!  
  • Calibrated Sweep Gas Regulator
    This is a high precision inert gas regulation valve assembled at Micro Matic & calibrated at DigiVac.
    • Forged brass and die cast for durability
    • O-Ring inlet seal at tank connection
    • Set screw pressure adjustment
    • Flow control inlet
    • Calibrated exclusively to the Summit sweep valve & vacuum controller
  • Edwards Speedivalve
    The Edwards Speedivalve (sp25k) is a diaphragm sealed in-line, isolation valve. The construction consists essentially of a flexible elastomeric dia­phragm which is sealed onto a lightly polished seat by a screw thread mechanism.The valve terminates in NW flanges and can be pipeline supported or panel mounted. Fits on all your KF25 flanges. Summit recommends these KF25 parts for this item:
    Easy to operate with visual indication of valve open (SP10K to SP25K). Leak tight to better than 10-6 mbar ls-1 / 8 x 10-7 Torr ls-1. Diaphragm completely isolates mechanism from vacuum system. Will withstand 9 bar overpressure (SP10K to SP40K, with Co-Seal)
     
  • This package enables convenient vacuum control in the range down to 10-3 mbar. Comes with a VV-B 15C in-line solenoid valve and all necessary small flange components. VACUUBRAND offers two packages, one with small flanges KF DN 16, suitable, e.g., for the VACUUBRAND RE/RZ 2.5 to RE/RZ 6 rotary vane pumps or our RC 6 Chemistry-HYBRID pump; or select the small flange KF DN 25 version suitable for our RE/RZ 9 to RE/RZ 16 rotary vane pumps. The CVC 3000 runs vacuum processes by control of external vacuum, venting and cooling water valves. In these packages the vacuum control is performed by opening and closing the in-line solenoid valve VV-B 15C. The controller and components are completely self-configuring and automatically checked via VACUU·BUS®communication protocol.

    Performance features

    • the CVC 3000 controls vacuum, cooling water and venting to demand
    • intuitive operation with turn-and-tap jog wheel and clear text menus
    • rugged VSP 3000 vacuum sensor made of plastics and ceramics with high chemical resistance, splash-water proof, also for rough operating conditions
    • VSP 3000 with wide measurement range from atmospheric pressure to fine vacuum (10-3 mbar) according to the principle of thermal conduction
    • the in-line solenoid valve is chemically highly resistant (series C)
  • This is the ULTRA HIGH VACUUM PUMP PACKAGE also know as UHVP package. This comes with an Edwards 30 roughing pump, and the adapters to connect the diffusion pump to it. This comes with a NEW MANUFACTURE TOP OF THE LINE ultra high rate - UHVP diffusion with incredible vacuum pressure and flow rates. Chiller to control temperatures on this diffusion pump. And of course our custom built and tuned SVC-3 setup
    • High rate diffusion pump
    • Adapters to fit
    • Chiller
    • E2M30 kit
    • UHVP - SVC-3 3 sensor kit
    LIMITED SUPPLY Setups do vary, please call for pricing.  
  • summit vacuum controller
    The SVC-1 Summit Vacuum Control is used for chemical duty solvent recovery or vacuum control. Either for rotary evaporators, filtration or recovering highly volatile solvents. This unit was designed and produced on the market to establish a new standard, with new circuit boards, PTFE valves and the LEAST amount of parts compared to any competitor units - the svc-1 makes a new standard in high flow vacuum control. The SVC-1 comes standard with the vacuum control, power supply and instructions.
  • The SVG-3 is a 3-zone digital identifier with all boards built in, for the first time user it comes STANDARD with 2-zone that reads two locations that are within (A)x10-4, to deliver accurate readings up to the range of 3-4 scale vacuum. the STANDARD SVG-3 is supplied with two extremely accurate and robust  sensors; one with a barb connection to read either at the laminar path monocow/distillation, and the second sensor comes with a kf25 flange connection to read the vacuum rate the pump is pulling. As we mentioned the SVG-3 comes with three pre-installed circuits built in, two of which are calibrated and installed for the 2 zone reading feature in the standard SVG-3 package. The third circuit installed and calibrated is READY and COMPLETELY setup for the addition of a UHVP sensor. This unit comes with two sensors and three boards installed, with the third board for UHVP installed and calibrated for a instant upgrade without having to buy new hardware or send yours back in. So exactly what is this setup? Easy, this is a encompassing 3 zone controller, designed at its full potential to read accurate readings from the:
    1. Distillation area of interest either at the cold trap, or at the reaction area.
    2. Initial vacuum pump readings that will allow the user to see the ultimate vacuum at the pump vs the vacuum at the first location.
    3. UHVP kits can now be added on with the third sensor that reads vacuum at the ultra high vacuum side.
    Contents include: 1x interface 3x circuits loaded, reinstalled, and calibrated 1x standard 4 scale vacuum sensor with barb 1x standard 4 scale vacuum sensor with kf25 The upgrade to the UHVP section requires only one part and is supplied only if pre-ordered with the setup, or purchased later.   Go for our newest vacuum gauge in the Apollo Vacuum Controller
  • Summit Vacuum Control SVG-3 UHVP Sensor 8 Scale. This is for JUST the UHVP sensor for the SVG-3. This is a post upgrade to work the 3rd UHVP port. Comes with connection accessories and kf25 adapters and tee, can be special order due to seasonal production. The Inficon Vacuum Gauge is the workhorse for all vacuum measurement applications. This controller combines two sensor systems into one small device to measure from atmosphere to 1x10 – 9 mbar. The patented ultra-low magnetic stray field design opens up a whole new range of applications. A unique interchangeable dual chamber sensor unit avoids cleaning cycles and reduces maintenance, making the Inficon the most robust and economical vacuum gauge of its kind.
  • Swage DV-2
    The Swagelok DV-2 is a ball and needle 3/8 dual pump valve kit.  A high vacuum, 2 piece valve setup, rated for up to 8/9 scale. This item itself is a major tool in controlling vacuum or bleeding atmosphere into pump without risking any leak point. Swagelok is leading the industry in these types of valves. See for yourself: swagelok/valves
  • Sweep Valve

    Sweep Valve

    $1,000.00
    Micro-controllable inert gas valve that installs directly to your boiling flask. Sweep valve connects to your calibrated sweep gas regulator. These components give you even more control with the Apollo Vacuum Controller. Complete control at your fingertips! Included:
    • KF16 (PTFE non-expanding material) to 24/40 fitting
    • KF16 O-ring
    • KF16 Clamp
    • Extended threaded tube
    • Wiring
  • VAT Valve

    VAT Valve

    $375.00
    The VAT valve is a German made, precision control, vacuum valve. KF25 openings to fit nice and snug in your vacuum setup. 90 degree valve.   Recommended add-ons for this item:  
  • VFD 10HP Multi-Phase
    Custom programmed for you. The Altivar 71 range of variable speed constant torque drives gives exceptional performance and advanced functions, with the emphasis on simplicity. New USA VFD 10HP Multi-Phase controller ONLY. Programmed and tested 10hp digital variable speed controller 1-3 phase or 3-3 phase option. Summit also has the VFD 1.5HP.