-
Same as Filter Bottle Top 45 except thicker elongated port and an added GL18 to allow faster flow under vacuum. The elongated recessed port decreases fluid spray. Rodaviss, GL18 and GL14 included. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Filter Top GL18 45 -
Sale!
Carbon powder is a filtration aid that is 100% organic and requires basic respiration for safe handling. Summit carbon chunks are 100% organic and also require respiration, however we have sourced a pre-activated and washed 99% DUST/POWDER FREE carbon.This carbon is non toxic, free from heavy metals and 100% natural, without any activation with hard chemicals like peroxides, hydroxides, fluorides, phosphoric acids.- 1x 4.5kg (10 lb) carbon powder A general decolorization and abatement of unwanted compounds
- 1x 3.6kg (8 lb) carbon chunks medium B aggressive sulfur and sulfate removal
- 1x 3.6kg (8 lb) carbon chunks small C aggressive pesticide reduction. Not entire removal.
-
Sale!
100% Non-Toxic100% Organic99.99% PureThe demonstration images are as follows:2. Initial oleoresin melt down3. Winterized4. Post scrub with silicate powder using the carbon solution. (comparison)We have achieved a 7 part blend specifically for curative filtration. This is laboratory grade, and is of high quality. Comes with the finest manufactured variation of crystal/silicate matrix available under the known and trusted name of Summit Research. Our proprietary house blend will absolutely satisfy your needs for final polishing in many variable methods. sds Directions: Measure out desired amount into beaker. Engage vacuum filtration apparatus with fresh filter paper. Slowly poor viscous prepared sludge onto filter paper until desired cake thickness is achieved. Wait a brief moment for cake to solidify and fluids to self level. Do not allow cake to dry out. Immediately add desired amount of solution over material matrix cake. Cake thickness and performance is relative to density and original clarity of solution to be aided in use. This filter aid is designed to establish an absolute final product prior to removal of solvents before preparation for consumption or further processing and refinement. Premium Summit Media, guaranteed to make your product shine. -
Sale!
99.9% Pure citric acid. Food and laboratory-grade material. All organic non-GMO. USA manufactured powder. Premium Summit Media, guaranteed to make your product shine.Call us for Bulk pricing.
-
Sale!
99.9% Pure sodium bicarbonate. Food and laboratory-grade material. All organic non-GMO. USA manufactured powder. Premium Summit Media, guaranteed to make your product shine. -
Sale!
99.9% Pure activated alumina. Food and laboratory grade material that is a high surface area, highly porous form of aluminum oxide. It adsorbs gases and liquids without altering its form. All organic non-GMO. USA manufactured powder. Premium Summit Media, guaranteed to make your product shine. -
Sale!
Summit Research Achromatizing Clay is an engineered multi composition stabilizing clay. Our clay is prepared under strict nano particulate milling and food grade proprietary activation processes, then further spray dried to a perfect and guaranteed shape/size with perfect micro pores for the best results. Premium Summit Media, guaranteed to make your product shine.Call us for Bulk pricing.
-
Sale!
Silica 60 (60a) is a chromatography powder gel bed used for remediation. Silica helps separate the fractions of compounds being passed through the stationary phase. Silica 60 offers high flow rates and high ability to adsorb/separate. Low operating pressure with reproducible results. Premium Summit Media, guaranteed to make your product shine.Call us for Bulk pricing.
-
Sale!
Mag-Sil (Activated Magnesium Silicate) is useful in Chromatography and CRC columns to remove pesticides, improve color, and to improve the clarity of your products. Magnesium silicate binds to polar, water-soluble compounds. Once these compounds have bonded with the Magnesium Silicate, the solution can be filtered through a recommended, 20-micron mesh screen. Summit Research medias are some of the highest purity and quality medias on the market. The very large active surface makes Mag-Sil useful for a wide variety of applications. It is used to remove impurities, pesticides, and unwanted colors, oftentimes in CRCs.Premium Summit Media, guaranteed to make your product shine. Call us for Bulk pricing.
-
Sale!
Summit custom engineered carbons are made without phosphoric acid, hydroxides, chlorides, fluorides and heavy metals. Only proprietary natural activating ingredients are used to create a 100% safe, organic, and non-toxic carbon that may be used with numerous solvents in laboratory filtration. Made by the largest and most trusted carbon supplier in the USA - we strive to provide each customer with the best scrubbing solution with maximum removal of unwanted compounds. These carbon matrices will remove colors, odors and inactive chemical compounds. Aids in removal of pesticides and unwanted harsh chemicals. This is a true FOOD GRADE product designed to make your product shine. Carbon A is an organic, fine neutralized powder most commonly used for de-clarification and major impurity removal. Use a 3.5-10% powder to winterized solution weight ratio. Example: 3.5-10g powder for 100g of solution. Use at 100°F. Do not use cold. Premium Summit Media, guaranteed to make your product shine. -
Sale!
Carbon B medium chunks Summit custom engineered carbons are made without phosphoric acid, hydroxides, chlorides, fluorides and heavy metals. Only proprietary natural activating ingredients are used to create a 100% safe, organic, and non-toxic carbon that may be used with numerous solvents in laboratory filtration. Made by the largest and most trusted carbon supplier in the USA - we strive to provide each customer with the best scrubbing solution with maximum removal of unwanted compounds. These carbon matrices will remove colors, odors and inactive chemical compounds. Aids in removal of pesticides and unwanted harsh chemicals. This is a true FOOD GRADE product designed to make your product shine. 3.6kg (8 lb) This organic neutralized carbon is used for targeting heavy sulfur, sulfates & fire retardant chemicals used in burn zones. It can be used in any ratio with Carbon A, or also used as a bedding for Carbon C for drip filtration. Carbon B can be placed into a small, thin stainless steel or glass column and simply poured through for basic removal. Better used warm. Premium Summit Media, guaranteed to make your product shine. -
Sale!
Carbon C small chunks Summit custom engineered carbons are made without phosphoric acid, hydroxides, chlorides, fluorides and heavy metals. Only proprietary natural activating ingredients are used to create a 100% safe, organic, and non-toxic carbon that may be used with numerous solvents in laboratory filtration. Made by the largest and most trusted carbon supplier in the USA - we strive to provide each customer with the best scrubbing solution with maximum removal of unwanted compounds. These carbon matrices will remove colors, odors and inactive chemical compounds. Aids in removal of pesticides and unwanted harsh chemicals. This is a true FOOD GRADE product designed to make your product shine. 3.6kg (8 lb) Carbon C has slightly less neutral carbon chunks for fine removal or semi-effective pesticide removal methods. Use a larger carbon (Carbon B) on the bottom, layer the top of the column with a long bed of Carbon C and use a drip filtration; this will generally take 15 minutes from top to bottom. Carbon C does not guarantee removal, but does remove at a highly effective rate prior to chromatography or other purification methods. Premium Summit Media, guaranteed to make your product shine. -
Pressurized fluid and solution stainless steel handling keg. 2 inch diameter tri-clamp. Full chemical duty. Choice of 5 gallon or 15 gallon. Whether running hot or cold, pressurized or not, these durable kegs get the job done. Made in USA. Comes with clamp, o-ring, two port lid and 3/8 nipples. Keg measures 26inches x 15.5inches. -
Pressurized fluid and solution stainless steel handling keg. 2 inch diameter tri-clamp. Full chemical duty. Choice of 5 gallon or 15 gallon. Whether running hot or cold, pressurized or not, these durable kegs get the job done. Made in USA. Comes with clamp, o-ring, two port lid and 3/8 nipples. Keg measures 26inches x 9inches. -
The Filter Bottle 20 Liter is genuine thick Schott glass media. We spared no cost to have our shop mount the bottle on a lathe and remove the bung section, replacing it with a Rodaviss female end. These flawless HEAVY DUTY glass filtration bottles are one of kind and come with Rodaviss wet-seal parts, Filter Bottle Top and High Temp PTFE GL14 connections. THIS ITEM DOES NOT HAVE A WARRANTY AND SHOULD BE TREATED WITH CARE ON A RUBBER MAT, WITHOUT OVER TIGHTENING THE TOP. RETURNS FOR DAMAGED BOTTLES WILL BE REFUSED UNCONDITIONALLY. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve for your filtration process's. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Filter Bottle 20 Liter -
The Filter Bottle 10 Liter is genuine thick Schott glass media. We spared no cost to have our shop mount the bottle on a lathe and remove the bung section, replacing it with a Rodaviss female end. These flawless HEAVY DUTY glass filtration bottles are one of kind and come with Rodaviss wet-seal parts, Filter Bottle Top and High Temp PTFE GL14 connections. THIS ITEM DOES NOT HAVE A WARRANTY AND SHOULD BE TREATED WITH CARE ON A RUBBER MAT, WITHOUT OVER TIGHTENING THE TOP. RETURNS FOR DAMAGED BOTTLES WILL BE REFUSED UNCONDITIONALLY. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve for your filtration process's. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. 10L Filter Bottle -
If you like T-5, try Achromatizing Clay for a purer process. Faster flow, similar color remediation and superior impurity removal.
T-5 is specifically used for oil purification, odor removal, distillation, and in chromatography and/or like processes. T-5 clay aids in decolorization / color remediation and has been proven to remove heavy metals such as lead, arsenic, cadmium, and mercury. (sds) -
Summit 4x48 Filter Column Complete comes with 2 stainless columns and complete rack and pump. 2 sets of sintered discs (16 total) (varying sizes) included. Swagelok valves. Stainless steel. Made in USA. Call us for more columns and fill your rack!
-
Chroma Column FF 6x48 with coarse/fine mixed frit and heavy wall thickness of 3mm. Special design allows for #29 Fraction Finder that permits you to check your fraction and watch your progression. Attach a FF between the frit and the stopcock area. Comes with rodaviss , GL18 and #45 Chroma Cap. Fraction Finder not included. All of our chromatography columns now have option to add an Ultra Sensitive Fraction Finder! Please use this column at your own risk! In addition to lab stands, it is recommended that you secure the lab stands to a wall or sturdy foundation while also using sandbags. This column will surpass 100+ lbs of weight holding full fluid. Please make sure you are offsetting the weight of your fluids. Summit requires this chromatography column to be supported by 3 chain clamps and a top mounted cork clamp. Summit recommends applying a thin rubber strip (the length of the chains contact) under the chain clamps (not included) to maximize grip. This column may slip though clamps if not properly bottom supported. Recommended (yet again), to have a lab tripod base (use rubber stripping here as well) or a circular clamp about 5" diameter (not included)(last picture). The Chroma Column FF 6x48 has no warranty. https://www.instagram.com/p/B5Lv5CzBAS-/ As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment you deserve for all your chromatography and CRC proccess's. Stands, clamps, sandbag and Fraction Finder are not included. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Chroma Column FF 6x48 -
Canna Bleach is a blended T-41 media with a sitting pH of 2-3. Acid activated scrub or bleaching clay that, when used, 5-30% in your boiling flask will achieve Delta 8. Used during oil purification, distillation prep, pesticide removal and odor removal. 4.4 lbs (2kg). sds Available in bulk T-41 Canna 20kg -
Canna Bleach is a blended T-41 media with a sitting pH of 2-3. Acid activated bleaching clay that, when used, 5-30% in your boiling flask will achieve Delta 8. Used during oil purification, distillation prep, pesticide removal and odor removal. 44 lbs (20kg). sds -
Chromatography Column 3x24 (inches) with coarse/fine mixed frit. Heavy wall thickness of 3mm. Comes with Rodaviss connection and 45/50 Chroma Cap (GL14 feed/vacuum port). The drain has a PTFE stopcock to GL18. All GLs are included. Chroma Cap has elongated recessed port with diffuser. This directs fluid spray against walls to gently fill the column and protect media from movement. All of our chromatography columns now have option to add an Ultra Sensitive Fraction Finder! To comply with warranty, Summit requires this chromatography column to be supported by a chain clamp and a top mounted cork clamp. Summit recommends applying a thin rubber strip (the length of the chains contact) under the chain clamp (not shown) to maximize grip. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment you deserve for all your chromatography and CRC proccess's. Lab stands and clamps not included. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Chromatography Column 3x24 -
Chromatography Column 4x36 (inches) with coarse/fine mixed frit. Heavy wall thickness of 3mm. Comes with Rodaviss connection and 45/50 Chroma Cap (GL14 feed/vacuum port). The drain has a PTFE stopcock to GL18. All GLs are included. Chroma Cap has elongated recessed port with diffuser. This directs fluid spray against walls to gently fill the column and protect media from movement. All of our chromatography columns now have option to add an Ultra Sensitive Fraction Finder! To comply with warranty, Summit requires this chromatography column to be supported by 2 chain clamps and a top mounted cork clamp. Summit recommends applying a thin rubber strip (the length of the chains contact) under the chain clamps (not shown) to maximize grip. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment you deserve for all your chromatography and CRC proccess's. Lab stands and clamps not included. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Chromatography Column 4x36 -
Chromatography Column 4x48 (inches) with coarse/fine mixed frit. Heavy wall thickness of 3mm. Comes with Rodaviss connection and 45/50 Chroma Cap (GL14 feed/vacuum port). The drain has a PTFE stopcock to GL18. All GLs are included. Chroma Cap has elongated recessed port with diffuser. This directs fluid spray against walls to gently fill the column and protect media from movement. All of our chromatography columns now have option to add an Ultra Sensitive Fraction Finder! To comply with warranty, Summit requires this chromatography column to be supported by 2 chain clamps and a top mounted cork clamp. Summit recommends applying a thin rubber strip (the length of the chains contact) under the chain clamps (not shown) to maximize grip. For this larger size column, Summit requires applying weight to the stand base such as a sand bag or something equivalent of 50 lbs+ (something to offset the weight of your fluids) As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment you deserve for all your chromatography and CRC proccess's. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Chromatography Column 4x48 -
Sale!
Chromatography Column 5x48 (inches) with coarse/fine mixed frit. Heavy wall thickness of 3mm. Comes with Rodaviss connection and 45/50 Chroma Cap (GL14 feed/vacuum port). The drain has a PTFE stopcock to GL18. All GLs are included. Chroma Cap has elongated recessed port with diffuser. This directs fluid spray against walls to gently fill the column and protect media from movement. All of our chromatography columns now have option to add an Ultra Sensitive Fraction Finder! In addition to lab stands, it is recommended that you secure the lab stands to a wall or sturdy foundation while also using sandbags. This column will surpass 80+ lbs of weight holding full fluid. Please make sure you are offsetting the weight of your fluids. Summit requires this chromatography column to be supported by 3 chain clamps and a top mounted cork clamp. Summit recommends applying a thin rubber strip (the length of the chains contact) under the chain clamps (not included) to maximize grip. This column may slip though clamps if not properly bottom supported. Recommended (yet again), to have a lab tripod base (use rubber stripping here as well) or circle clamp base about 4″ diameter (not included)(last picture). Stands , clamps and sandbag are not included. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment you deserve for all your chromatography and CRC proccess's. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Chromatography Column 5x48 -
Sale!
Chromatography Column 6x48 (inches) with coarse/fine mixed frit and heavy wall thickness of 3mm. Comes with Rodaviss connection and 45/50 Chroma Cap (GL14 feed/vacuum port). The drain has a PTFE stopcock to GL18. All GLs are included. Chroma Cap has elongated recessed port with diffuser. This directs fluid spray against walls to gently fill the column and protect media from movement. All of our chromatography columns now have option to add an Ultra Sensitive Fraction Finder! Please use this column at your own risk! In addition to lab stands, it is recommended that you secure the lab stands to a wall or sturdy foundation while also using sandbags. This column will surpass 100+ lbs of weight holding full fluid. Please make sure you are offsetting the weight of your fluids. Summit requires this chromatography column to be supported by 3 chain clamps and a top mounted cork clamp. Summit recommends applying a thin rubber strip (the length of the chains contact) under the chain clamps (not included) to maximize grip. This column may slip though clamps if not properly bottom supported. Recommended (yet again), to have a lab tripod base (use rubber stripping here as well) or circle clamp about 5" diameter (not included)(last picture). The 6x48 Chromatography Column has no warranty. Stands , clamps and sandbags not included. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment you deserve for all your chromatography and CRC proccess's. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Chromatography Column 6x48
-
The stage 3 dual media, fine filtration set comes with fine glass microfiber filters (thick) and the support backing cellulose filter (thin) total count is 500 of each type of material. Add both papers together to form your <0.9 micron. 7x7.25 inch papers fit exclusively in Summit PIGs. 500 Units < 0.5 micron 500 Units 20-25 micron Rejection of all compounds @ < 0.9 micron sds Also available:- 35 micron standard PIG papers. (500pcs)
- 20 micron Stage 1 PIG papers (500pcs)
- 8 micron stage 2 PIG papers (500pcs)
-
Stage 2 PIG papers (500pcs). These are 8 micron filter papers. 7x7.25 inch papers fit exclusively in Summit PIGs. sds Also available:- 35 Micron standard PIG papers. (500pcs)
- 20 micron Stage 1 PIG papers (500pcs)
- 1 Micron stage 3 PIG papers (500pcs)
-
Stage 1 PIG papers (500pcs). These are 20 micron filter papers. 7x7.25 inch papers fit exclusively in Summit PIGs. sds Also available:- 35 Micron standard PIG papers. (500pcs)
- 8 Micron stage 2 PIG papers (500pcs)
- 1 Micron stage 3 PIG papers (500pcs)
-
Sale!
Stage 1 - 1000pcs of 20u chemical duty paper. Stage 2 - 1000pcs of 8u chemical duty paper. Stage 3 - 500pcs of sub 1u chemical duty 100% borosilicate paper (no chemical binder grade AE). These circular papers have a 142mm diameter (5.6 inch). All papers made in USA with no questionable composition, and no import junk. Straight up, best high flow papers you’ll ever use.
