6×48 Chromatography Column with Faction Finder collar and coarse/fine mixed frit. Special design allows for #29 FF that permits you to check your fraction and watch your progression. Comes with rodaviss connection and #45 Chroma Cap (GL14 feed/vacuum port). Drain is GL18. All GLs are included. Made in USA. 100% Schott glass.
Please use this column at your own risk! In addition to lab stands, it is recommended that you secure the lab stands to a wall or sturdy foundation while also using sandbags. This column will surpass 100+ lbs of weight holding full fluid. Please make sure you are offsetting the weight of your fluids.
Summit requires this chromatography column to be supported by 3 chain clamps and a top mounted cork clamp. Summit recommends applying a thin rubber strip (the length of the chains contact) under the chain clamps (not included) to maximize grip. This column may slip though clamps if not properly bottom supported. Recommended (yet again), to have a lab tripod base (use rubber stripping here as well) about 5″ diameter (not included)(last picture). The 6×48 Chromatography Column FF has no warranty.
Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. 6×48 Chrom Column FF