high efficiency

  • Atlas GX7 10HP

    Atlas Compressor GX7 10HP

    $11,260.00

    Presenting the Atlas Copco 10 HP air compressor. This is a single stage, air cooled, oil injected, rotary screw compressor with integrated dryer and 71 gallon tank (tank upgrades available, please contact us). 208-230/460 Volt AC  3-Phase  36.7 cfm. Also included:
    • compressor
    • drive motor
    • oil & air system
    • electro-pneumatic controls
    • coalescing filter
    • oil water separator
    • auto tank drain
    Oil-Injected 10-HP Rotary Screw Compressor
    • Powerful & reliable solution for small & medium sized industries
    • 130 psi
    • Manufactured & tested to meet ISO 9001/9002, ISO 14001 & ISO 1217
    Built-In Refrigerant Air Dryer
    • Cools the compressed air & removes the water before it enters your network
    • Prevents rust in compressed air piping & avoids damage to air tools
    • Water separator with electronic no-loss water drain included
    Low Noise Rotary Technology
    • Enclosure reduces sound levels so you work nearby
    • Optimized cooling air flow enhances quiet operation
    Accessible Service Points
    • Grouped together & accessible through the removable panel
    • Spin-on oil separator & filter are easy to maintain
     
    Weight: 692 Pounds
    Product Length 60 Inches
    Product Width 23 Inches
    Product Height 52 Inches
      To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
    Details
  • SPD-4 Bertha 150

    Short Path Distillation Head Bertha 150

    $5,499.99
    The Short Path Distillation Head Bertha 150, since development in 2018, has become one of the leading standards in distillation head types in the industry. 2023 has brought the Bertha 100 to its final perfect form with 6 generations of evolution. This head comes equipped with 45/50 thermoport, 34/45 discharge port and a 100mm bore that secures to a boiling flask with o-ring and clamp. The Short Path Distillation Head Bertha 150 (previously SPD-4 MPD Big Bertha) is an extremely high vapor fractionation column head. The first section starts in the flask to retain as much heat in the column as possible. This entire column and entry into flask is isolated from the outside air and the flange fittings. The first chamber is a rough fractionation chamber with a lower rejection section that prevents any condensate from moving upwards. The center section is a secondary refinement section and will further refine the vapors. The upper third section is our patented fraction collector. The first dual stage fractionation column to ever be invented or used in distillation glassware, pilot or small scale. Can achieve 4-6 liters per hour (8 liters per hour with upgraded chilling and vacuum accessories) first pass and ready for crystallization. Vigs are not needed for this technology due to the industry first "no-vig" approach which utilizes a baffled section that extends down below the head base and into the boiling flask. Requirement to use these heads would be a sogevac + dual e2m30 -or- sogevac + e80 -or-  sogevac + e80 + diffusion array. This particular setup benefits from a custom diffusion array and an Apollo Vacuum Controller with the inert gas sweeping feature. Effectively increasing the stock speed and lowering the temperatures further. Included: Our MPD heads fit exclusively to Summit MPD boiling flasks: As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve.       Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Short Path Distillation Head Bertha 150
    Add to cart Details
  • Kaeser Aircenter 10hp

    Kaeser SM 10 Aircenter

    $21,100.00 *Price subject to change for different configurations

    Kaeser Aircenters are the answer to many challenges. The integrated design reduces time spent planning and purchasing your air system. We combine the reliability, energy efficiency, and easy-to-service design of our industrial rotary screw compressors into a quiet, space-saving package complete with storage tank and air treatment equipment. Aircenters arrive completely assembled, saving you a lot of time and expense. Aircenters require little space and are the perfect solution for smaller industrial operations. With noise levels as quiet as 61 dB(A) you can install it anywhere without disrupting productivity.
    Included with your compressor:
    •  Start-up Service
    • CA Code Piping
    • Clean Air Treatment Package (KE Filter + Eco-Drain on Tank)
    • KCF 25 Condensate Filter with Mounting Kit
    • 3/4" X 36" Flex Hose
    Working pressure (psi) : 125 , 160 , (217 additional costs) Flow rate at working pressure (acfm) : 46 , 37 , 28 Refrigerated dryer : ABT 15 Receiver volume (gal) : 71.3 W x D x H (inch) : 25 x 48 x 68 Compressed air connection : 3/4 NPT Sound pressure level (dB[A]) : 67 Weight (lb) : 970   To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
    Details
  • Aircenter 7.5hp

    Kaeser SX 7.5 Aircenter

    $18,600.00 *Price subject to change for different configurations

    Kaeser Aircenters are the answer to many challenges. The integrated design reduces time spent planning and purchasing your air system. We combine the reliability, energy efficiency, and easy-to-service design of our industrial rotary screw compressors into a quiet, space-saving package complete with storage tank and air treatment equipment. Aircenters arrive completely assembled, saving you a lot of time and expense. Aircenters require little space and are the perfect solution for smaller industrial operations. With noise levels as quiet as 61 dB(A) you can install it anywhere without disrupting productivity.
    Included with your compressor:
    •  Start-up Service
    • CA Code Piping
    • Clean Air Treatment Package (KE Filter + Eco-Drain on Tank)
    • KCF 25 Condensate Filter with Mounting Kit
    • 3/4" X 36" Flex Hose
    Working pressure (psi) : 125 , 160 , (217 additional costs) Flow rate at working pressure (acfm) : 28 , 24 , 19 Refrigerated dryer : ABT 4 Receiver volume (gal) : 52.8 W x D x H (inch) : 23 x 43 x 62 Compressed air connection : 3/4 NPT Sound pressure level (dB[A]) : 66 Weight (lb) : 661   To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
    Details
  • Aircenter 5hp

    Kaeser SX 5 Aircenter

    $15,300.00 *Price subject to change for different configurations

    Kaeser Aircenters are the answer to many challenges. The integrated design reduces time spent planning and purchasing your air system. We combine the reliability, energy efficiency, and easy-to-service design of our industrial rotary screw compressors into a quiet, space-saving package complete with storage tank and air treatment equipment. Aircenters arrive completely assembled, saving you a lot of time and expense. Aircenters require little space and are the perfect solution for smaller industrial operations. With noise levels as quiet as 61 dB(A) you can install it anywhere without disrupting productivity.
    Included with your compressor:
    •  Start-up Service
    • CA Code Piping
    • Clean Air Treatment Package (KE Filter + Eco-Drain on Tank)
    • KCF 25 Condensate Filter with Mounting Kit
    • 3/4" X 36" Flex Hose
    Working pressure (psi) : 125 , 160 , (217 additional costs) Flow rate at working pressure (acfm) : 21 , 17 , 13 Refrigerated dryer : ABT 8 Receiver volume (gal) : 52.8 W x D x H (inch) : 23 x 43 x 62 Compressed air connection : 3/4 NPT Sound pressure level (dB[A]) : 63 Weight (lb) : 639   To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
    Details
  • SPD-4 HB1 Halo 100

    Short Path Distillation Head HB1 Halo 100

    $4,499.99

    The HB Series Halo heads are inspired by our original fraction collector technology and have taken theses concepts to a new level. Halo technology allows for liquid temperature modulation at the top the head, dialing in your temps at a point in your short path distillation never before achieved. See the Halo in action: Instagram Demo instagram logo 100mm clamp, O-ring and PTFE GL18s (4) included. Has 34/45 discharge port with built in key. Our 100mm heads fit exclusively to Summit flanged boiling flasks: As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process.     Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Short Path Distillation Head HB1 Halo 100 To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
    Details
  • SPD-4 HB1 Halo 100

    Short Path Distillation Head HB1 Halo 150

    $4,849.99

    The HB Series Halo heads are inspired by our original fraction collector technology and have taken theses concepts to a new level. Halo technology allows for liquid temperature modulation at the top the head, dialing in your temps at a point in your short path distillation never before achieved. See the Halo in action: Instagram Demo instagram logo 150mm clamp, O-ring and PTFE GL18s (4) included. Has 34/45 discharge port with built in key. Our 150mm heads fit exclusively to Summit flanged boiling flasks: As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process.     Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Short Path Distillation Head HB1 Halo 150 To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
    Details
  • SPD-4 HB2 Halo 150

    Short Path Distillation Head HB2 Halo 150

    $5,224.99

    The HB Series Halo heads are inspired by our original fraction collector technology and have taken theses concepts to a new level. Halo technology allows for liquid temperature modulation at the top the head, dialing in your temps at a point in your short path distillation never before achieved. See the Halo in action: Instagram Demo instagram logo 150mm clamp with O-ring and PTFE GL18s (4) included. 45/50 Key port and appropriate key & well stopper. 34/45 discharge port. Our 150mm heads fit exclusively to Summit flanged boiling flasks: As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process.     Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Short Path Distillation Head HB2 Halo 150 To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
    Details
  • CT-3 Shorty

    Cold Trap 3 Shorty

    $1,599.99
    When the going gets tough, you can't ever be too safe! A triple coil intermediate trap with female 34/45 inlet and male outlet. This trapping mechanism is used as a laminar path connection recommended for larger short path distillation setups (22-50L) leading into dual cold traps. Heavy wall and joint thickness. Upgraded GL18 connections prevent barb breakage and mass body failure from stress of removing hoses. Extreme duty capacity and redesigned custom sized parallel flow coils that supply you with unmatched cooling. Collection flask port 45/50. Comes complete with: As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process.       Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Cold Trap 3 Shorty
    Add to cart Details
  • KF40 Bellow

    KF40 Bellow

    From: $289.99
    The KF40 Bellow is a corrugated stainless steel pipe that connects to corresponding kf40 flanges. These malleable pipes allow for some error as apposed to hooking up a solid straight pipe. Available in 24 and 36 inch lengths. Don't forget other KF40 fittings and accessories: 100% stainless steel. 100% USA made. Bellow warning: Stretch and bend your bellow into position before installation. Engaging your pump(s) while not doing so could make the bellow jolt/jostle, putting stress on or damage glassware, voiding limited warranties. KF40 Bellow
    Options Details
  • 45mm Filter Bottle Top GL18

    Filter Top GL18 45

    $229.99
    Same as Filter Bottle Top 45 except thicker elongated port and an added GL18 to allow faster flow under vacuum. The elongated recessed port decreases fluid spray. Rodaviss, GL18 and GL14 included. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process.       Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Filter Top GL18 45
    Add to cart Details
  • Sale!
    Head Key 15 Band 24/40

    Head Key 15 Band 24/40

    Original price was: $149.99.Current price is: $33.99.
    100% Schott glass 24/40 plug. 9 inch overall length (6 inches from bottom of frosted taper) with 15 bands. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process.       Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Head Key 15 Band 24/40
    Add to cart Details
  • 2 Liter Short Path Head SPD-8 Micro

    Short Path Distillation 8 Micro Head

    $4,999.99

    The new SPD-8 Series Heads (FC55, 60mm, 100mm, 150mm) bring a fraction collecting core combined with condenser coil. If you want absolute temperature control in a head, look no further. With these types of heads, if you dip the coil temp down it will act as a violent collection of molecules dragged to the coil like a magnet. That coil would inherently distribute those lower temps right on the surface of the fraction collector dish and that would display a whole new set of efficiency within the head. All Short Path Distillation 8 Heads have a 45/50 thermoport and a 34/45 discharge arm. This 2 liter head comes with boiling flask! Can be upgraded to 5 liter flask, please call us. Short Path Distillation 8 Head in use at the lab: Instagram Demo instagram logo The condenser in this 60mm head absorbs as much heat as possible and removes BTU energy from the vapor prior to entering the condenser arm. This allows the vacuum jacketed head to operate like it’s supposed to. The coil in the head doesn’t disturb molecular flow dynamics as it’s duty is to absorb heat before the heat affects the sides of the walls of the fraction collector as well as allows those ambient vacuum void temps to be more stable. When you get blow by in a head it means it’s just working overtime because the arm sends back fluids to the heater chiller and it can’t maintain the BTU heat removal. So if you can maintain exact temps you can bounce unwanted fractions right out of the condenser arm without over shooting flow rates. This maintains a drier vacuum in the condenser arm. Included with this head: As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process.       Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Short Path Distillation 8 Micro Head To purchase, please contact Summit Research at 8312262948 or by eMail. Limited run items ship 1-3 days after orders have been processed unless otherwise specified.
    Details
  • KF25 Male JIC Adapter

    KF25 Male JIC Adapter

    $109.99
    1" Male JIC to KF25 adapter (Harvest Right Adapter) fits any KF25 flange. Summit's stainless adapters contain 100% USA made precision billet steel. Why choose an adapter with multiple parts and more chances to leak?
    Add to cart Details
  • 1.5hp Heavy Duty

    Polyscience 1.5hp Heavy Duty Chiller LO/BP

    $8,800.00

    Polyscience 1.5hp Heavy Duty Chiller LO/BP has a LOW OUTPUT/BACK PRESSURE return system.  Exclusive to Summit, this 1.5hp offers more efficiency than the standard unit and comes in 100% stainless enclosure build out for a sexy look - 10l high temperature to 20l medium temperature rating for rotovaps. 220v
    • Small footprint conserves floor space
    • Displays temperature and pressure or flow rate simultaneously
    • User-adjustable temperature, pressure, and flow rate alarms
    • Simple operation and maintenance
    For detailed information visit polyscience.com To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
    Details