spd

  • First of its kind, innovation and performance meet the future of distillation. The Ultra Short Path Distillation Head (previously SPD-7) is a fascinating technology inspired by an ultra low temperature process. The Summit research SPD-7 is a horizontal head designed to fully refine products at a low temperature; preferred material required should be refined previously, or physically refined through all filtration and washing/chroma processes prior to running through this system. Material must be completely dried and full vacuum cannot be engaged if material is wet. Do not attempt to load green/black crude material. This system requires much more vacuum requirement so please keep in mind the 22 liter system takes a diffusion, and the 5 liter system can use dual e2m28/30. With a high flow triple condenser coil to GL18 adapters, the temps are dialed in throughout this horizontal head. Big bore 55/50 inlet and outlet with a traditional 29/42 discharge to flask. Wait, there's more! This head acts as a large swing arm, so you can swing and engage the flask to your targeted fraction. See the SPD7 in action (pt1): Instagram Demo instagram logo See the SPD7 in action (pt2): Instagram Demo instagram logo Head, KF25 adapter and GL18s (2) included. Glassware (boiling flask & cold trap) exclusive to this ultra short path head: Here is a complete look at the SPD-7 USPD setup. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your ultra short path distillation process.       Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Ultra Short Path Distillation Head
  • First of its kind, innovation and performance meet the future of distillation. The Ultra Short Path Distillation Micro Head (previously SPD-7.1) is a fascinating technology inspired by an ultra low temperature process. The Summit research SPD-7.1 is a horizontal head designed to fully refine products at a low temperature; preferred material required should be refined previously, or physically refined through all filtration and washing/chroma processes prior to running through this system. Material must be completely dried and full vacuum cannot be engaged if material is wet. Do not attempt to load green/black crude material. This system requires much more vacuum requirement so please keep in mind the 22 liter system takes a diffusion, and the 5 liter system can use dual e2m28/30. With a high flow dual condenser coil to GL18 adapters, the temps are dialed in throughout this horizontal head. Big bore 45/50 inlet and outlet with a traditional 29/42 discharge to flask. Wait, there's more! This head acts as a large swing arm, so you can swing and engage the flask to your targeted fraction. See the SPD7 in action (pt1): Instagram Demo instagram logo See the SPD7 in action (pt2): Instagram Demo instagram logo Head, KF25 adapter and GL18s (2) included. Glassware (boiling flask & cold trap) exclusive to this ultra short path head: For a complete look at SPD-7.1 Micro USPD setup: As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your ultra short path distillation process.       Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Ultra Short Path Distillation Micro Head
  • Boiling Flask 22L-3N-USPD is made from high quality Schott glass and is a Rundkolben (triple offset joints) design with 24-24-55 ports. This flask has a horizontal port which fits exclusively to our USPD Head. Accept no imitations, the dimensions and geometry of the joints are original concepts brought to market by Summit Research. We strive to provide the best products for your needs. 22 Liter round bottom flask with 55/50 horizontal main port. Fits exclusively with: Ultra Short Path Distillation Head (Head) Cold Trap USPD Triple (Cold Trap) As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Boiling Flask 22L-3N-USPD
  • Boiling Flask 5L-3N-USPD is made from high quality Schott glass and is a Rundkolben (triple offset joints) design with 24-24-45 ports. This flask has a horizontal port which fits exclusively to our USPD Micro Head. Accept no imitations, the dimensions and geometry of the joints are original concepts brought to market by Summit Research. We strive to provide the best products for your needs. 5 Liter round bottom flask with 45/50 horizontal main port. Fits exclusively with: Ultra Short Path Distillation Micro Head (Head) Cold Trap USPD Dual (Cold Trap) As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Boiling Flask 5L-3N-USPD
  • This is a custom married part to the ultra short path distillation systems by Summit Research. A dual coil intermediate trap with 45/50 inlet and 34/45 outlet to cold trap. This trapping mechanism is used as a laminar path connection and can be ran hot or cold depending on your process. Extreme duty capacity and redesigned custom sized parallel flow coils that supply you with unmatched cooling. Collection flask port 45/50. Comes complete with: This cold trap fits exclusively with Summit's Micro USPD setup: As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Clamps and stands not included.       Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Cold Trap USPD Dual
  • $6,831.25

    Edwards E2M28, 1 Phase, 115-240V, 50/60Hz vacuum pump. Pump oil and EMF20 with accessories not included.
    • Type of product: Vane Pump
    • Condition: New
    • Inlet: KF25
    • Exhaust: KF25
    • Motor: 1 Phase, 115-240V, 50/60Hz
    • Oil: Hydrocarbon
    • Pumping speed: 19.5 CFM (60Hz)
    • Ultimate pressure: 7.5 x 10-4 Torr (without gas ballast)
    • Weight: 97 lbs
    To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
  • $7,275.00

    Edwards E2M28, 1 Phase, 115-240V, 50/60Hz vacuum pump. Pump oil and EMF20 with accessories are included.
    • Type of product: Vane Pump
    • Condition: New
    • Inlet: KF25
    • Exhaust: KF25
    • Motor: 1 Phase, 115-240V, 50/60Hz
    • Oil: Hydrocarbon
    • Pumping speed: 19.5 CFM (60Hz)
    • Ultimate pressure: 7.5 x 10-4 Torr (without gas ballast)
    • Weight: 97 lbs
    To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
  • $6,793.75

    Atlas Copco GVD28 1 Phase, 110-120/200-230V, 50/60Hz. Pump oil and EMF20 with accessories are included.
    • Type of product: Vane Pump
    • Condition: New
    • Inlet: KF25
    • Exhaust: Hose Nipple
    • Motor: 1 Phase, 110-120/200-230V, 50/60Hz
    • Oil: Hydrocarbon
    • Pumping speed: 23.3 CFM (60 Hz)
    • Ultimate vacuum: 7.7 x 10-4 Torr (without gas ballast)
    • Weight: 97 lbs
    To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
  • Fits Size 29 Fraction Finder Sensor Details:
    • Bundle that includes the Collection Jar Adapter and Collection Jar Mount
    • For use with Wiped Film Evaporation systems, such as Root Sciences/VTA, to enable collected distillate to flow through the Size 29 Fraction Finder Sensor
    • For use with Ball collection jar (not included)
     
  • Fits Size 29 or 34 Fraction Finder Sensor (drop down menu) Details:
    • Goes in-line between the condenser & collection flask, allowing you to use the Fraction Finder in a new location and still run a hot condenser.
    • High temperatures can be problematic for our sensor; this relocates where Fraction Finder could be positioned.
    • Watch this video to see how it works.
    Sensor not included  
  • From: $8,450.00

    Interfaces any centrifuge extractor that doesn't require C1D2 (ethanol, heptane, methanol, etc.) with the size 34 Fraction Finder sensor.
    Sight Glass for Ethanol Extraction – includes shield and modified size 34 sensor
    • 1.5″ or 2" Sanitary flange sight glass with shield and a modified sensor (includes sensor pre-installed, evacuation/purge cycle, vacuum and pressure tested, sensor tested, and 10′ cable)
    • Fraction Finder sensor included and pre-installed
    • For use with an ethanol extractor
      To purchase, please contact Summit Research at 8312262948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.
  • Fits Size 29 Fraction Finder Sensor Details:
    • 1L teardrop/recovery flask with Rodaviss 29/42 connection with extended neck with 28mm O.D.