-
Premium Schott glass 45/50 key well. 11.25 inch overall length. 6.5 inch length from bottom of the frosted taper with 5 bands. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Head Key Well 45/50 -
$6,292.25
Polyscience AD 7 liter chiller/heater has an advanced digital 7L space saving refrigerated circulator, -40 to 200 deg C, 360W Cooling power @ 20 deg C, 1100W Heater, 4.3 psi (0.30 bar), 5.3 gpm (20.1 LPM), 120V, 60Hz. Polyscience chillers/heaters are powerful, low to high temperature units that are matched for use with rotary evaporators, vacuum systems, spectrometers, and other analytical equipment. They also are available with a mobile feature for convenient placement under a bench.- Intuitive 3.75” (9.5 cm) display with touch pad control
- Swivel 180™ rotating controller
- On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, and external temperature probe
- On-screen prompts
- Automatic performance optimization and specific heat tuning
- Single-point calibration capability
-
KF25 Straight Pipe is an 8 inch stainless steel high vacuum pipe. KF25 Flanges. Summit has other KF25 products in our Stainless Steel section. Looking for a specific length?.. we might be able to help! Call us -
Reflux condensers are used in “conversion” processes to cool the vapor molecules emitted from heated oils to change their gaseous state back into liquid by means of a chilled dual coil. This unit is recommended for 12L and smaller boiling flasks. How it works: The condenser is attached to the boiling flask joint and is secured in a vertical position. Chiller fluid is circulated through the coil to cause the vapors to condense as they rise up through the condenser coils thus preventing them from escaping. This gives you the option to reflux different fluids in your boiling flask for extended periods of time before you run the SPD, this is a must have in the lab for conversions. Flask entry port is 55/50 with 24/40 exit port. Total dimensions 25.75 x 2.25 inch. High Temp GLs included. 24/40 to GL14 Adapter OR 24/40 to GL18 Adapter included. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve. NEED A 34/45 PORT? Call us, you can custom order anything! Base not included Summit recommends all users to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Reflux Condenser Dual Coil -
Sale!
The Separatory Funnel 2 Liter comes with a Sep Funnel Cap 45 that has improved recessed port for increased velocity when self mixing. The application, with vacuum, will launch the washing solution into the loaded solution and properly mix them without ever having to remove the funnel from the stand. The PTFE flow control valve (stopcock) is equipped with GL18 for adequate flow and accurate shutoff. Threaded 45/50 port out the top for Rodaviss. High temp PTFE GL connectors, rodaviss and cap all included. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve whether you are water washing or terpene extracting and everything in between. Stands, clamps & supports not included. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Separatory Funnel 2 Liter -
$7,047.25
Polyscience AD 15 Liter chiller/heater are powerful, low to high temperature units that are matched for use with rotary evaporators, vacuum systems, spectrometers, and other analytical equipment. They also are available with a mobile feature for convenient placement under a bench. KEY SPECS:
Overall Depth: 22.4 in H: 26.9 in W: 14.5 in To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing.Controller Type Advanced DigitalDisplay 3.75" Touch-Pad LCDConnectivity Ethernet, USB A & B, RS232/addressable RS485, External Temperature ProbeLanguages Supported 4: French, German, Spanish, EnglishSwivel 180 Rotating Controller YesWorking Temperature Range °C -40°c to 200°cTemperature Stability °C ±0.01°Fluid Optimization/Specific Heat Tuning Automatic and/or user-adjustableTemperature Calibration Capability 1-pointWorking Access (L x W x D) (cm) 8.35 x 10.88 x 5.5 inPump Type Pressure/SuctionExternal Temperature Control Capability YesFlammability Class (DIN 12876-1) III (FL) -
Pressurized fluid and solution stainless steel handling keg. 2 inch diameter tri-clamp. Full chemical duty. Choice of 5 gallon or 15 gallon. Whether running hot or cold, pressurized or not, these durable kegs get the job done. Made in USA. Comes with clamp, o-ring, two port lid and 3/8 nipples. Keg measures 26inches x 15.5inches. -
The Valved Coil-less Laminar 34 allows you to isolate your joint with a PTFE threaded valve. Enables you to swap out your receiving flask without loosing vacuum. With this option, simply lower the valve and unscrew the GL cap to release the vacuum to change your flask. Comes complete with 24/40 Stopper, all necessary keck clips, GL14 cap and choice of #24/40 KF25 adapter. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Valved Coil-less Laminar 34 -
The Female to Male Reducer takes a 34/45 female port and reduces to a 24/40 male port. The possibilities with this adapter are endless. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Female to Male Reducer -
Sale!
ROCK BOTTOM Clearance Sale! While supplies last. Boiling Flask 2L-3N-24 is made from high quality Schott glass and is the original Rundkolben (triple offset joints) 3 neck round bottom flask. The most popular and strongest short path distillation flask of its kind. All joints are standard taper 24/40. 2 Liter flask. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Boiling Flask 2L-3N-24 -
24/40 Continuous oil/water separator for terpene extraction. Isolates oil both lighter and heavier than water. Comes equipped with PTFE flow control valve (stopcock). For many different seperations. Find similar and corresponding parts in our Terpene Glassware section. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Terpene Oil/Water Separator -
KF16x10 Centering Ring. Viton rubber and stainless steel. Used with breather valves and barbs. Comes in the KF Breather Valve Kit. 100% USA made. -
KF16 O Ring will fit between any KF16 flange while using a KF16 clamp. Made from Viton and stainless steel. -
Billet stainless steel adapter that reduces the diameter of your KF vacuum pipe. KF40 to KF25 flange. Summit has corresponding KF25 and KF40 products in our Stainless Steel section. -
The Boiling Flask 22L-3N-100mm is made from high quality Schott glass, and is the original Rundkolben (triple offset joints) flask. The most popular and strongest short path distillation flask of its kind. Made specifically for Summit MPD heads. The dimensions and geometry of the joints are original concepts brought to market by Summit Research. Joints are standard taper 24/40 (2) and 100mm main flange. 22 Liter round bottom flask. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. O-ring and clamp not included (comes with any MPD head) Other sizes to choose from: Summit recommends all users to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use. We are not responsible or liable for loss of subsequent hardware contamination/failure with or without the result of damaged surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Boiling Flask 22L-3N-100
