-
Hochstrom O-rings (2 included) that fits at the bottom of your Hochstrom filter™. Made from Viton, a synthetic rubber and fluoropolymer elastomer, that is chemical-resistant. 100% USA made. -
KF25 O Ring will fit between any KF25 flange while using a KF25 clamp. Made from Viton and stainless steel. -
Filter Bottle Top 45 comes with Rodaviss and (2) GL14s. Top has elongated recessed port to decrease fluid spray. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Need more flow from your Filter Bottle Top?? We have limited supply of Filter Top GL18 45 to increase flow with GL18 and larger bore port. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Filter Bottle Top 45 -
Pressurized fluid and solution stainless steel handling keg. 2 inch diameter tri-clamp. Full chemical duty. Choice of 5 gallon or 15 gallon. Whether running hot or cold, pressurized or not, these durable kegs get the job done. Made in USA. Comes with clamp, o-ring, two port lid and 3/8 nipples. Keg measures 26inches x 9inches. -
The Filter Bottle 20 Liter is genuine thick Schott glass media. We spared no cost to have our shop mount the bottle on a lathe and remove the bung section, replacing it with a Rodaviss female end. These flawless HEAVY DUTY glass filtration bottles are one of kind and come with Rodaviss wet-seal parts, Filter Bottle Top and High Temp PTFE GL14 connections. THIS ITEM DOES NOT HAVE A WARRANTY AND SHOULD BE TREATED WITH CARE ON A RUBBER MAT, WITHOUT OVER TIGHTENING THE TOP. RETURNS FOR DAMAGED BOTTLES WILL BE REFUSED UNCONDITIONALLY. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve for your filtration process's. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Filter Bottle 20 Liter -
Laminar Coil-less 34 is a shorter, more compact short path distillation arm which allows for higher temperatures in the vapor bypass. A true laminar with less turbulence. Comes with #24 glass stopper and choice of #24/40 KF25 adapter. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Laminar Coil-less 34 -
The Edwards Speedivalve (sp25k) is a diaphragm sealed in-line, isolation valve. The construction consists essentially of a flexible elastomeric diaphragm which is sealed onto a lightly polished seat by a screw thread mechanism. The valve terminates in NW flanges and can be pipeline supported or panel mounted. Fits on all your KF25 flanges. Summit recommends these KF25 parts for this item:Easy to operate with visual indication of valve open (SP10K to SP25K). Leak tight to better than 10-6 mbar ls-1 / 8 x 10-7 Torr ls-1. Diaphragm completely isolates mechanism from vacuum system. Will withstand 9 bar overpressure (SP10K to SP40K, with Co-Seal) -
The Cold Trap 2 Shorty (CT-2 Inv Cup Shorty) sets itself apart from others with its patented inverse cup technology. Vapors enter the cup, creating a turbulent vortex, then are forced to condense straight down ensuring proper dry vacuum protection to the pumps. Most traditional traps bypass vapors, only relying on cold surfaces, while this trap prevents nearly all vapors from bypassing. 34/45 female inlet and male outlet. 45/50 flask port. Comes included with: As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Cold Trap 2 Shorty -
The KF25 Adapter 34/45 is typically used to convert a glass system to a vacuum system or sensor. Hook up to a bellow, Straight Pipe, KF25 sensor or any KF25 flange. Secure your glass to steel connection with a keck clip. Stainless billet parts made right here in the USA. -
The KF25 Adapter 24/40 is typically used to convert a glass system to a vacuum system or sensor. Hook up to a bellow, Straight Pipe, KF25 sensor or any KF25 flange. Secure your glass to steel connection with a keck clip. Stainless billet parts made right here in the USA. -
Receiving Flask 29/42 2 Liter round bottom flask designed with a 29mm standard taper joint. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve to streamline your short path distillation process. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. Receiving Flask 29/42 2 Liter. -
The Filter Bottle 10 Liter is genuine thick Schott glass media. We spared no cost to have our shop mount the bottle on a lathe and remove the bung section, replacing it with a Rodaviss female end. These flawless HEAVY DUTY glass filtration bottles are one of kind and come with Rodaviss wet-seal parts, Filter Bottle Top and High Temp PTFE GL14 connections. THIS ITEM DOES NOT HAVE A WARRANTY AND SHOULD BE TREATED WITH CARE ON A RUBBER MAT, WITHOUT OVER TIGHTENING THE TOP. RETURNS FOR DAMAGED BOTTLES WILL BE REFUSED UNCONDITIONALLY. As always, Summit uses 100% best quality glass blanks that are THICKER and built BEYOND STANDARDS made right here in the USA. Our glassware is made specifically for efficiency and durability. Summit provides the quality of lab equipment that you deserve for your filtration process's. Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal. 10L Filter Bottle