$2,800.00
The Sogevac single stage rotary vane pumps are required for any sized hardpiped system and can be very useful on hosed systems as well.
Design Features
Recommended parts:
Contents include:
1x interface
3x circuits loaded, reinstalled, and calibrated
2x standard 4 scale vacuum sensor with kf25
The upgrade to the UHVP section requires only one part and is supplied only if pre-ordered with the setup, or purchased later.
Want a touch screen vacuum gauge? Try our Apollo Vacuum Controller 
$16,500.00
These Vacuubrand VARIO® pumping units feature a very high pumping speed even close to the outstanding ultimate vacuum and are ideal for high vacuum requirements with most high boiling solvents. They provide precise vacuum control by continuously adjusting the pump´s motor speed. The controller provides fully automatic evaporations without any need for parameter input. The pump design offers exceptionally high chemical resistance supporting almost universal usage in chemistry and pharmaceutics. The NT VARIO pumping unit relies on a well-proven operating concept for evaporations with large amounts of solvents. The inlet separator (AK) retains particles and liquid droplets, the waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling, and active protection of the environment. The NT VARIO can be equipped with these accessories later. The Vario 12c pump is an excellent solution for those who need high pumping speed and are working with high boiling point solvents. Combined with the reliability born of its chemical resistant fluoropolymer and perfluoroelastomer wetted materials, this pump delivers reliable performance for floor-standing rotary evaporators, vacuum drying ovens, vacuum distillation columns, and other similar applications. The integrated vacuum controller provides an easy-to-use, application based interface that covers all common lab applications. The vacuum controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the vacuum controller continuously detects the boiling point and automatically adjusts the vacuum process to maintain process control. With VARIO control, the pump runs only as fast is necessary. This extends the maintenance intervals and makes the pumping unit whisper quiet. Also available 4c Vario
$10,600.00
The dry screw pump VACUU·PURE® 10C reliably delivers the benefits of oil-free vacuum technology in the pressure range of 10-3 mbar. The new vacuum pump combines three important benefits for the user: 100% oil-free, chemically resistant, and no wear parts. VACUU·PURE 10C is ideally suited for clean processes and the production of pure products. The screw pump is especially designed for processes in the vacuum range down to 10-3 mbar, however unlike other fine vacuum technologies it can be used across the entire pressure range from atmospheric pressure to its ultimate vacuum. At the same time, aggressive gases and vapors can be pumped without any worries because of the high chemical resistance. The use of a cold trap is no longer necessary in the majority of applications. VACUU·PURE easily handles high vapor loads through its extraordinary condensate compatibility. Thanks to this capability, a gas ballast is unnecessary, avoiding associated disadvantages like the reduction in pumping speed and an increase in noise levels. The integrated regeneration mode enables rapid drying of the pump at the end of the process. This allows sample throughput to be increased significantly as compared to other pump technologies.| Specification | VACUU·PURE 10C |
| Max. pumping speed | 9 m3/h |
| Ultimate vacuum (abs.) | 5 x 10-3 mbar (at 1013 mbar ambient pressure) |
| Max. inlet pressure (abs.) | atmospheric pressure |
| Max. outlet pressure (abs.) | 15 mbar above atmospheric pressure |
| Ambient temperature range (operation) | 10 - 40 °C |
| Ambient temperature range (storage) | -10 - 60 °C |
| Inlet connection | KF 25 flange |
| Outlet connection | KF 25 flange |
| Rated motor power | 0.7 kW |
| Protection class | IP 20 |
| Dimensions (L x W x H), approx. | 507 x 269 x 413 mm |
| Weight, approx. | 21.5 kg |
| Noise (sound pressure level), uncertainty 3 dBA | 55 dBA |
| Items supplied | Pump completely mounted, ready for use, connection with small flange KF DN 25 (2x centering and clamping rings included), with manual. To establish a hose nozzle connection, suitable KF flanges with hose nozzle are available for order. |
For more details or manual, visit VacuuBrand directly.
To purchase, please contact Summit Research at 831-226-2948 or by eMail. Items ship 1-3 days after orders have been processed unless otherwise specified. Price does not include shipping and will be included in your final estimate before processing. 
