#29 High Efficiency MONOCOW


The #29 high efficiency Monocow is a non-contamination discharge adapter. Wet vacuum lines are a burden, and a issue with larger batches as vacuum efficiency is reduced with contaminated lines. The solution is to collect and drop out the entire mass from vapor phase to condensate in itself. While the main discharge drains distillate; the vapors bypass and enter the area that prevents any contamination mixing into the discharge flask. This creates a dry vapor line for the vacuum to efficiently operate. Standard cows, from doing switches, can drop this oozy slime back into your desired locations when vacuum breaks and the discharge drains from a typical cow. This entirely solves the issue by separating it. The coil temperature alternatively can be lowered to create molecular vacuum regeneration during distillation with ultra low temperature chillers.

Made in USA 100% Schott glass. Comes with (4)GL14.

Summit recommends all users of any and all glassware to operate inside a ventilated fume hood with sufficient blast shields to prevent injury in case of fatigued glass failure. Summit is not responsible or liable for the result of any failures from use, and/or loss of subsequent hardware contamination/failure with or without the result of material loss or damaged caused to surroundings. By purchasing our premiere lines of laboratory glassware the user is responsible to operate in the recommended environment safely. We recommend all users to operate in a legal and licensed facility where safety is the number 1 goal.


There are no reviews yet.

Be the first to review “#29 High Efficiency MONOCOW”

Your email address will not be published. Required fields are marked *